SE Electronics sE4400a Multi-Pattern Condenser Microphone Matched Stereo Pair
4400a Factory-Matched Stereo Pair
When purchased as a pair, the capsules are factory-matched for perfect tolerance, guaranteeing the best possible stereo image.
This configuration also includes a precision stereo mounting bar and two of the the 4400a's custom shock mounts. The whole setup comes packaged inside a secure flight case.
Four polar patterns, a vintage-style brass capsule, two bass cuts and two pads, and the most adaptable shockmount around - the 4400a is pure modern classic.
Much like a few particularly well-known classic European condensers, the 4400a is a true all-rounder. You can put it up on just about anything and it'll sound great.
Unfortunately for many studio owners, those "classic condensers" are often not what they used to be. Capsule designs change over time, capacitors dry out, metal switches are replaced with plastic buttons and LEDs, and the mics that were once so versatile are now mere shadows of their former selves.
As with all sE mics, the 4400a's back-to-back brass-ringed capsules are hand-built and hand-tuned by our skilled technicians, just like any fine musical instrument.
CUSTOM SHOCKMOUNT + CHASSIS
The flat, round-edged chassis design and custom suspension mount allow the mic to be centered within the shock, flipped around and used flat against a drum head or guitar cab, or angled outwards and pushed through inside of a kick drum. And at less than 3/4" thick, it fits neatly in the palm of your hand, but is built to take a beating on the road.
- Frequency Response: 20 Hz-20 KHz
- Sensitivity: 14.1mv/pa-37db ± 1dB
- Polar Pattern: Cardioid, Figure 8, Omni, supercardioid
- Impedance: = 50 Ohms
- Equivalent Noise Level: 17dB(A weighted)
- Max SPL for 0.5% THD @ 1000Hz: 130dB
- Power Requirement: Phantom power 48V±4V
- Connector: 3-pin