Sale sE Electronics DM1 Active Inline Mic Preamp

sE Electronics DM1 Active Inline Mic Preamp

  • $99.00
  • Availability: In Stock


 

The DM1 DYNAMITE:  Explosive level for all your passive mics

 

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your passive microphones.

With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent 28dB regardless of the connected load, thanks to its dedicated buffer amplifier.

The DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp – all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

Includes

  • DM1
  • sE Logo Sticker
  • User manual with warranty card

Features

  • +28dB of clean, consistent gain, independent of load
  • Sophisticated Class-A Electronics
  • Dedicated output buffer amplifier
  • Slim, rugged all-metal housing with premium finish
  • Gold-plated XLR connector

Specifications

  • Frequency Range........................10Hz-120,000Hz
  • Gain............................28dB (load 1000 Ohms)
  • Max output level..........(0.5% THD): 8.3 dBV (2.6 V)
  • Output noise level:..................... 9 μV (JIS-A)
  • Powering:........................ 48 Volts(IEC 61938)
  • Electrical impedance:........................135 Ohms
  • Recommended load impedance:..................>1k Ohms
  • Current consumption:...........................3.0 mA
  • Connectivity:.........3-pin male/female XLR connector
  • Dimensions:.......................... (0.75")x(3.76")
  • Weight:.......................................2.82 oz



Scroll To Top