Audix

Sale

Audix CabGrabber

The innovative CabGrabber by Audix is a new solution for miking guitar amps and cabinets. The steel frame construction of the CabGrabber is spring loaded allowing you to easily put the microphone where you want it and keep it there. The CabGrabber also has guides for microphone cords to keep them out of the way in the studio or on the stage.

Includes

  • Audix CabGrabber

Applications

  • Stage or studio miking of a guitar amplifier or cabinet.

Features

  • Simple, elegant, compact and easy to use.
  • Allows for precise positioning of any microphone.
  • Compact and lightweight design.
  • Durable steel construction.
  • No tools required.
  • Works on cabinets with a flat surface or recessed edge.

Specifications

  • Will hold Microphones up to 1 lb
  • Fits amplifiers or cabinets 8"-14"
  • Dimensions: 4" x 2" x 2"
  • Weight: 4.8 oz.
$49.00 $59.00
Sale

Audix D-Clamp

Percussion-mount mic holder for drums.

The D-clamp is a low profile, simple-to-use mounting system that eliminates the need for bulky mic stands. Easily operated, the D-Clamp is provided with a standard 5/8” thread adapter which allows ant mic to be used by just simply changing the clip. 

The MC2 clip provided fits Audix D series microphones. The D-Clamp works on most tension rods associated with hand percussion instruments (such as congas and bongos) as well as standard 9.5mm and 10.5mm knurled rods found on tom and percussion mounts. It provides a nice clean look especially when used with the Audix right angle XLR mic cable. 

The D-Clamp can also be used with the Audix Micro-D small condenser mic by simply replacing the D-Clamps gooseneck with the Micro-D gooseneck. The allows the Micro-D to be used in tight spaces (congas, timbales, bongos), where a larger dynamic mic may be hard to position.

Includes

  • Audix D-Clamp
  • Audix D-Clip now included!

Applications

  • Works on most tension rods associated with hand percussion instruments (such as bongos and congas)
  • Fits standard 9.5mm and 10.5 mm knurled rods found on many tom and percussion mounts

Features

  • Standard 5/8" adapter allows use of any standard mic clip
  • Small flexible gooseneck allows easy positioning
  • Eliminates need for additional mic stands

Specifications

  • Finish: ...Black
  • Length:...Approx. 6"
  • Weight:...3 oz
$27.95 $29.95
Sale

Audix D-CLAMP

Flexible mini-gooseneck with drum tension lug clamp for D2, D4. Other mics can be used by replacing clip.

Includes

  • Audix D-Clamp Mic Clamp

Applications

  • Drums
  • Percussion

Features

  • Flexible multi-position metal gooseneck
  • Locks firmly into position
  • Fingertip control
  • Lightweight, durable and scratch resistant
  • Eliminates bulky mic stands
  • Works with any mic
$27.95 $32.00
Sale

Audix D-Vice

The Audix D-Vice is a microphone clip that will quickly and easily attach to any rimmed drum. The flexible mini-gooseneck allows you to place and mic the drum exactly where and how you want it.

Includes

  • Audix D-Vice.

Applications

  • Use with any rimmed drum.
  • Studio use.
  • Live stage use.

Features

  • Attaches to any rimmed drum.
  • Flexible neck allows you to place microphone exactly where you want.
  • Accommodates any 5/8" mic clip.
  • Spring loaded clip allows for placement using one hand.
$27.95 $32.00
Sale

Audix D6

Dynamic Cardioid Kickdrum Microphone 

Designed, machined, assembled and tested by Audix in the USA, the D6 is a dynamic instrument microphone used for stage, studio and broadcast applications. 

The D6, has a cardioid pickup pattern for isolation and feedback control, is equipped with a VLM™ (Very Low Mass) diaphragm for natural, accurate sound reproduction. The D6 is lightweight, compact and easy to position. With a wide frequency response of 30 Hz - 15 kHz and the ability to handle sound pressure levels in excess of 144 dB, the D6 an excellent choice for miking instruments requiring extended low frequency reproduction such as kick drum, large toms, and bass cabinets. 

Roadworthy construction includes a precision machined aluminum body, black anodized finish, laser etched model and serial number, steel mesh grill, Switchcraft® XLR connector and includes a tension-fit heavy duty nylon mic clip. 

Transformerless design, low impedance, and balanced output allow for interference-free performance even with long cable runs.

Includes

  • Audix D6 Dynamic Cardiod Microhone

Applications

  • Live Stage
  • Recording
  • Kick Drum
  • Large Toms
  • Bass Cabinets

Features

  • Lightweight
  • Compact and easy to position
  • Transformer-less design

Specifications

  • Transducer Type: ...Dynamic
  • Polar Pattern:...Cardiod
  • Frequency Response:...30Hz-15kHz
  • Impedance:....280 ohms
  • Sensitivity:...2.4mV/Pa @80Hz
$199.00 $349.00
Sale

Audix F50

High SPL Dynamic Vocal Microphone 

A vocal microphone designed to sound clear and full bodied on small to mid-sized PA systems, the F50 is a dynamic vocal microphone designed for a wide variety of live and studio applications. 

The F50 is known for its warm, natural sound reproduction, resistance to feedback and ability to handle high sound pressure levels without distortion. The F50 is characterized with a tight and uniformly controlled cardioid polar pattern which helps to isolate the vocals from the rest of the instruments on stage. 

With a wide frequency range of 50 Hz – 16 kHz, the F50 is also available with a noiseless, magnetic on-off switch (F50-S). The F50 is designed to sound clear and full bodied on small to mid-size PA systems. 

The F50 is well balanced, comfortable to hold, durable, and manufactured with very high standards and tight tolerances. Roadworthy construction includes a precision cast zinc alloy, black e-coat finish, steel mesh grill, gold plated XLR connector and heavy duty ABS clip.

Includes

  • Audix F50 Dynamic Cardiod Microhone
  • Heavyduty ABS Microphone Clip

Applications

  • Multi-purpose Stage
  • Karaoke
  • House of Worship
  • Home recording
  • Acoustic Instruments, Drums and Guitar cabinets

Features

  • Warm, natural vocal reproduction
  • Handles High SPL without distortion
  • Low handling noise
  • Cardiod pattern helps resist feedback
  • Provides excellent vocal isolation on stage
  • Durable steel grill
  • 5 year Manufacturers Warranty

Specifications

  • Transducer Type: ...Dynamic
  • Polar Pattern:...Cardiod
  • Frequency Response:...50Hz-16kHz
  • Impedance:....250 ohms
  • Sensitivity:...2.5mV/Pa @1kHz
  • Off Axis Rejection:...>20 dB @ 180 deg
  • Maximum SPL:...≥138 dB
  • Power Requirements:...None
  • Connector:...3-pin XLR Male (Gold Plated)
  • Polarity:...Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing / Finish:...Zinc Alloy/Black E-coat
  • Weight:...11 oz (312 g)
  • Length:...6.7 in (169 mm)
$49.00 $65.00
Sale

Audix FireBall V

Dynamic Cardioid Instrument Microphone 

Dynamic harmonica microphone with conveniently placed volume control knob. Designed, assembled and tested by Audix in the USA, the FireBall V is a professional dynamic instrument microphone intended for harmonica (both diatonic and chromatic) and beatbox. 

Clear, accurate, and capable of handling sound pressure levels in excess of 140 dB without distortion, the FireBall V is ideally suited for both live stage and recording applications, and has the added convenience of a volume control. 

 The FireBall V is characterized with a cardioid pickup pattern for isolation and feedback control, and is equipped with a VLM™ (Very Low Mass) diaphragm for natural sound reproduction with exceptional transient response. 

 With a wide frequency response of 50 Hz - 16 kHz, the FireBall V is lightweight, compact, and comfortable to hold. 

Roadworthy construction includes a precision cast zinc alloy body, steel mesh grill, black e-coat finish, laser etched model and serial number, Switchcraft® XLR connector and includes a tension-fit heavy duty nylon mic clip. 

 The FireBall V is a low impedance microphone; when using the FireBall V with a guitar amplifier, a high quality low-high impedance transformer (such as T50K) is required.

Includes

  • Audix Fireball V

Applications

  • Live Stage
  • Studio
  • VocalsHarmonica
  • Beatbox
  • Percussion
  • Saxophone,Trumpet,Trombone
  • Flute
  • Accordian

Features

  • Volume Knob
  • Fits comfortably in the palm of the hand
  • Handles “cupping” without impacting sound quality
  • Full size dynamic capsule
  • Clear and accurate sound reproduction
  • High SPL handling without distortion
  • Exceptional gain before feedback
  • Provides excellent isolation from other instruments on stage
  • 5 year Manufacturers Warranty

Specifications

  • Transducer Type: ...Dynamic
  • Polar Pattern:...Cardiod
  • Frequency Response:...50Hz-16kHz
  • Impedance:....150 ohms
  • Sensitivity:...1.5mV/Pa @1kHz
  • Capsule Technology...VLM Type B
  • Off Axis Rejection:...≥23 dB
  • Maximum SPL:...≥140 dB
  • Power Requirements:...None
  • Connector:...3-pin XLR Male
  • Polarity:...Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing / Finish:...Zinc Alloy/Black E-coat
  • Weight:...5 oz (140 g)
  • Length:...3.9 in (99.5 mm)
$199.00 $249.00
Sale

Audix FireBall™ Dynamic Cardioid Instrument Microphone

Ultra-small high performance, dynamic harmonica microphone. Designed, machined, assembled and tested by Audix in the USA, the FireBall™ is a professional dynamic instrument microphone intended for harmonica (both diatonic and chromatic) and beatbox. Clear, accurate and capable of handling sound pressure levels in excess of 140 dB without distortion, the FireBall™ is ideally suited for both live stage and studio recording applications. 

The FireBall™ is characterized with a cardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ (Very Low Mass) diaphragm for natural sound reproduction with exceptional transient response. With a smooth, uniform frequency response of 50 Hz - 16 kHz, the FireBall™ is lightweight, compact, and comfortable to hold. 

Roadworthy construction includes a precision machined aluminum body, steel mesh grill, unique three stage marbled anodized finish, laser etched model and serial number, Switchcraft® XLR connector, and heavy duty nylon clip. 

The FireBall™ is a low impedance microphone; when using the FireBall™ with a guitar amplifier, a high quality low-high impedance transformer (such as T50K) is required.

Includes

  • Audix Fireball

Applications

  • Live Stage
  • Studio
  • VocalsHarmonica
  • Beatbox
  • Percussion
  • Saxophone,Trumpet,Trombone
  • Flute
  • Accordian

Features

  • Fits comfortably in the palm of the hand
  • Handles “cupping” without impacting sound quality
  • Full size dynamic capsule
  • Clear and accurate sound reproduction
  • High SPL handling without distortion
  • Exceptional gain before feedback
  • Provides excellent isolation from other instruments on stage
  • Precision machined aluminum body
  • 5 year Manufacturers Warranty

Specifications

  • Transducer Type: ...Dynamic
  • Polar Pattern:...Cardiod
  • Frequency Response:...50Hz-16kHz
  • Impedance:....150 ohms
  • Sensitivity:...1.5mV/Pa @1kHz
  • Capsule Technology...VLM Type B
  • Off Axis Rejection:...≥23 dB
  • Maximum SPL:...≥140 dB
  • Power Requirements:...None
  • Connector:...3-pin XLR Male
  • Polarity:...Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing / Finish:...Machined Aluminum/Anodized
  • Weight:...4.5 oz (128 g)
  • Length:...3.05 in (77.5 mm)
$149.00 $179.00
Sale

Audix i5 Multi-Purpose Dynamic Cardioid Microphone

Designed, assembled and tested by Audix in the USA, the i5 is a dynamic instrument microphone used for stage, studio and broadcast applications. The i5 is able to handle sound pressure levels in excess of 140 dB without distortion and can be used to mic a wide variety of musical instruments, guitar and bass cabinets, vocals and speech.

The i5 is characterized with a cardioid pickup pattern for isolation and feedback control and is equipped with a VLM™ (Very Low Mass) diaphragm for natural, accurate sound reproduction.

The i5 is sturdy, compact and easy to position. With a wide frequency response of 50 Hz - 16 kHz, the i5 provides clear, accurate, natural sound reproduction without having to rely on EQ.

Roadworthy construction includes a precision cast zinc alloy body, steel grill, black e-coat finish, laser etched model and serial number, Switchcraft® XLR connector and includes a heavy duty nylon mic clip.

Includes

  • i5 Multipurpose Mic
  • Heavy duty nylon clip (MC1)
  • Carrying pouch (P1)

Applications

  • Live stage
  • Studio
  • Snare, Toms, Percussion
  • Guitar cabinets, Electric instruments
  • Bass cabninets
  • Brass, flute, woodwinds
  • Acoustic instruments
  • Vocals, speech

Features

  • Clear and accurate sound reproduction
  • Handles high SPL without distortion
  • Provides exceptional isolation on stage
  • Precision cast zinc alloy body and grill
  • 5 year Manufacturer's Warranty  

Specifications

  • Transducer Type:...Dynamic
  • Frequency Response:...50Hz-16kHz
  • Polar Pattern...Cardioid
  • Output Impedance:...150 ohms
  • Sensitivity:...1.5mV/Pa@1k
  • Capsule Technology:...VLM Type B
  • Off Axis Rejection:...>23dB
  • Maximum SPL:...>140dB
  • Power Requirements:...None
  • Connector:...3-pin XLR male
  • Polariy:...Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Housing/Finish...Diecast Zinc Alloy/Black E-coat
  • Weight:...6.5 ounces (183g)
  • Length:...5.6 in (141.5mm)
$99.00 $150.00
Sale

Audix OM3

Dynamic Hypercardioid Vocal Microphone 

Designed, assembled and tested by Audix in the USA, the OM3 is a dynamic vocal microphone used for a wide variety of live, studio and broadcast applications.

The OM3 is known for its clear and accurate sound reproduction, resistance to feedback and ability to handle very high SPL (Sound Pressure Levels) without distortion. 

The OM3 is characterized with a tight and uniformly controlled hypercardioid polar pattern which helps to isolate the vocals from the rest of the instruments on stage. With a wide frequency range of 50 Hz - 18 kHz, the OM3 employs a VLMTM(Very Low Mass) diaphragm for a clean and natural sound with exceptional transient response. 

The OM3 is naturally attenuated in the lower mid-bass frequencies in order to reduce boominess and handling noise. This, in conjunction with an extremely articulate mid-range, makes the OM3 an excellent choice for PA systems of all sizes.

The OM3 is well balanced, comfortable to hold, durable and manufactured with high standards and tight tolerances. 

The OM3 includes a precision die cast zinc alloy body, black E-coat finish, laser etched model and serial number, steel mesh grill, Switchcraft® XLR connector and heavy duty nylon clip.

Includes

  • Audix OM3
  • Heavy Duty Nylon Clip
  • Carrying Pouch

Applications

  • Lead or backing vocals
  • Live recording
  • Broadcast
  • Home studio-vocal and instrument
  • Sax, Brass, Guitar, Dobro, Flute, Percussion, Drums

Features

  • Clear, accurate vocal reproduction
  • Handles high SPL without distortion
  • Low handling noise
  • Exceptional gain before feedback
  • Excellent vocal isolation on stage
  • Dent resistant steel spring grill
  • 5 year warranty

Specifications

  • Operating Principle:...Dynamic
  • Frequency Response:...50Hz-18kHz
  • Polar Patttern:...Hypercardiod
  • Output Impedance:...250 ohms
  • Sensitivity:...1.7 mV/Pa @1kHz
  • Maximum SPL:...≥144 dB
$129.00 $199.00
Sale

Audix OM5

Dynamic Hypercardioid Microphone 

Designed, assembled, and tested by Audix in the USA, the OM5 is a dynamic vocal microphone used for stage, studio and broadcast applications. The OM5 is known for its clarity, resistance to feedback and ability to handle sound pressure levels in excess of 144 dB without distortion.

The OM5 is characterized with an extremely tight and uniformly controlled hypercardioid polar pattern which helps to isolate the vocals from the rest of the instruments on stage. With a wide frequency range of 48 Hz - 19 kHz, the OM5 employs a VLMTM (Very Low Mass) diaphragm for natural response, accurate sound reproduction, and exceptional transient response.

The OM5 is naturally attenuated at 120 Hz to reduce boominess and handling noise. The mid-range is tailored for presence allowing the vocalist to be more easily heard in the mains as well as the monitors. The OM5 is comfortable to hold, durable, and manufactured with high standards and tight tolerances.

Roadworthy construction includes a precision die cast zinc alloy body, black e-coat finish, laser etched model and serial number, steel mesh grill, Switchcraft® XLR connector, and heavy duty nylon clip.

Includes

  • Audix OM5
  • Heavy duty nylon mic clip (MC1)
  • Carrying pouch (P1)

Applications

  • Lead or backing vocals
  • Live recording
  • Broadcast
  • Home studio-vocal and instrument
  • Sax,Brass,Guitar,Dobro,Flute,Persussion,Drums

Features

  • Clear, accurate vocal reproduction
  • Handles high SPL without distortion
  • Low handling noise
  • Exceptional gain before feedback
  • Maximum vocal isolation on stage
  • Dent resistant steel spring grill
  • 5 year warranty

Specifications

  • Operating Principle:...Dynamic
  • Frequency Response:...48Hz-19kHz
  • Polar Patttern:...Hypercardiod
  • Output Impedance:...200 ohms
  • Sensitivity:...1.8 mV/Pa @1kHz
  • Maximum SPL:...≥144 dB
  • Power Requirements:...None
$159.00 $265.00
Sale

Audix STAND-KD

LOW PROFILE STAND WITH BOOM ARM FOR USE WITH KICK DRUM AND GUITAR AMPS

Includes

  • Model STAND-KD

Applications

  • Kick Drums
  • Guitar Amps
  • Bass Cabinet

Features

  • Low profile

Specifications

  • Minimum stand height: 325 mm / 12.8"
  • Minimum boom length: 447 mm / 17.6"
  • Maximum stand height: 530 mm / 21"
  • Maximum boom length: 785 mm / 31"
  • Net Weight: 3.4 Kilos / 7.4 lbs
  • Finish: Black
$39.00 $49.95
Sale

Audix T-50K

The T50-k is a professional impedance matching transfomer that allows a low impedance microphone (100-600 Ohms) to be connected to a high impedance input (10k-50k Ohms).

A typical application for the T-50k would be if one wanted to plug a low impedance microphone directly into the high impedance input of a guitar amplifier for either vocals or harmonica

In this case, one would plug the XLR-male connector of the microphone cable directly into the XLR-femal connector of the T-50k. The 1/4" connector of the T50-k would then plug directly into the input of the guitar amplifier.

The T50-k may be used with long microphone cable helping to prevent loss of signal, degradation of frequency response, and extraneous hum or noise.

Includes

  • T50-k Transformer

Applications

  • Harmonica
  • Vocals

Features

  • Rugged, Road Worthy Construction
  • Long-Life Gold Plated Connectors
  • 7MM Rubber Jacketed Cable Interface
  • Heavy Duty Strain Relief

Specifications

  • Frequency Response:...20Hz-20kHz
  • Impedance:...(Low Impedance Side)600 Ohms ±15% @ 1kHz 1V
  • Impedance:...(High Impedance Side)50,000 Ohms ±15% @ 1kHz 1V
  • DC Resistance:...(Low Impedance Side)155 Ohms ± 10%
  • DC Resistance:...(High Impedance Side)2250 Ohms ±10%
  • Voltage Ratio @1kHz 1V:...Low Z to High Z...+17.5dB
  • Voltage Ratio @1kHz 1V:...High Z to Low Z...-17.7dB
$24.95 $29.95
Sale

Audix USB12

The USB12 is a miniaturized USB condenser microphone used for recording voice and acoustic instruments directly into a computer. Known for its clarity, excellent transient response, SPL handling and ease of operation, the USB12 is designed to naturally capture and reproduce vocals and instruments with stunning detail.

The USB12, which is characterized with a uniformly controlled cardioid polar pattern, provides excellent isolation and control at the sound source. With a smooth and accurate response over a frequency range of 50 Hz - 16 kHz, the USB12 sits on top of a stable desktop base and can be quickly and easily adjusted to any position.

The USB12 has a 16 bit sample resolution and supports 44.1k and 48k sample rates for both playback and recording. This high definition condenser microphone features a push-to-talk button with the option of ‘steady on’ or ‘momentary on’ as well as a headphone jack for real time monitoring and a bass roll-off filter to control unwanted low frequency signals.

The USB12 includes a 6 ft USB cable, matte black finish and field replaceable capsule. Also available in white (USB12-W).

Includes

  • USB12 Professional Recording Microphone
  • 6' USB Cable (CBL-USB6)
  • External Windscreen (WS20)

Applications

  • Recording Vocals or Instruments
  • Live Chat / IP Communication
  • Podcasting
  • Medical / Legal Reporting
  • Conferencing
  • Internet Telecommunications

Features

  • Flexible gooseneck design
  • Records directly into computer via USB port
  • Studio quality sound
  • "Plug and Play"
  • Compatible with both PC and Mac
  • 16 bit sample resolution
  • Supports 44.1k and 48k sample rates
  • 12 mm high resolution condenser capsule
  • Push to Talk-- ‘steady on’ or ‘momentary on’
  • Bass roll-off filter
  • Headphone jack for real time monitoring
  • Available in black or white

Specifications

  • Frequency Response:...50Hz-16kHz
  • Impedance:...(Low Impedance Side)600 Ohms ±15% @ 1kHz 1V
  • Polar Pattern:...Cardioid
  • Output Impedance:...1000 Ohms
  • Sensitivity:...1.3mV/Pa
  • SN Ratio:...64dB, 1k @ 1 Pa
  • Switch Type:...Membrane
  • Switch Function: Push to Talk(PTT) or Push to Lock (PTL)
  • Sampling Rate:...16 bit, 44.1 k / 48 K for both playback and recording
  • Finish:...White or Black
$149.00 $179.00

Scroll To Top