Neutrik

The RX Series is the right angle version of the XX cable connector series. The successor of the RC series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief.

3 pole right angle female cable connector, nickel housing, silver contacts

Features & Benefits

• Extra slim right-angle connector
• 5 selectable cable outlet positions
• Unique cage design of female contact for low contact resistance and high integrity
• Female contact incorporates a solder barrier to prevent solder running into the contact mating area
• Female connector with improved solid metal latch which is larger and easier to handle
• Additional ground spring contacts for better shell ground continuity
• Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster
• Boot with polyurethane gland gives high protection to cable bending stresses
• Coloured rings and boots available for coding or identification
• Sleek and ergonomic design - valuable and handy

Neutrik's NC3FX is a 3-pole XLR-F cable connector with Nickel housing and silver contacts.

Electrical Specifications:

• Number of contacts: 3
• Contact resistance: = 3 m ohm
• Insulation resistance, initial: > 2 G ohm
• Insulation resistance, after damp heat test: > 1 G ohm
• Dielectric strength: 1500 V dc
• Rated current: 16 A
• AWG: 2.5 mm²/14 AWG
• Capacitance between contacts: = 4 pF

Mechanical Specifications:

• Lifetime: >1000 cycles
• Insertion / withdrawal force: = 20 N
• Cable O.D. range: 3.5 mm - 8.0 mm

Material Specifications:

• Shell: ZnAl4Cu1, gal Ni over Cu plating
• Insert: PA 6.6 30% GR (glass reinforced)
• Contacts: CuSn8
• Contact surface: gal 2 µm Ag
• Latch lock (female): St3K32
• Strain-relief clamp: POM
• Antikink bushing: PUR

Environmental Specifications:

• Temperature range: -30° C to + 80° C
• Flammability: UL 94HB
• Solderability: complies with IEC 68-2-20

Neutrik NC3MX is a 3-pole XLR-M cable connector with Nickel housing and silver contacts.

Features:

• Rugged diecast shell, rear insert, robust and compact design (shortest available XLR cable connector).
• Time saving assembly: only 4 pieces, no set screws.
• Neutrik unique chuck-type strain relief.
• UL recognized component.

Neutrik's NC3FXX is a 3-pole XLR-F cable connector with Nickel housing and silver contacts.

Electrical Specifications:

• Number of contacts: 3
• Contact resistance: = 3 m Ohm
• Insulation resistance, initial: > 2 G Ohm; after damp heat test: > 1 G Ohm
• Dielectric strength: 1500 V dc
• Rated current: 16 A
• AWG: 2.5 mm²/14 AWG
• Capacitance between contacts: = 4 pF

Mechanical Specifications:

• Lifetime: >1000 cycles
• Insertion / withdrawal force: = 20 N
• Cable O.D. range: 3.5 mm - 8.0 mm

Material Specifications:

• Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
• Insert: Polyamide PA 6.6 30% GR (glass reinforced)
• Contacts: Bronze CuSn8
• Contact surface: gal 2 µm Ag silver
• Latch lock: ZnAl4Cu1
• Strain-relief clamp: POM
• Antikink bushing: PA + PU

Environmental Specifications:

• Temperature range: -30° C to + 80° C
• Flammability: UL 94HB
• Solderability: complies with IEC 68-2-20

The Neutrik NC3MXX is a 3-pin XLR-M cable connector, male with nickel housing and silver contacts.

Electrical Specifications:

• Number of contacts: 3
• Contact resistance: = 3 m Ohm
• Insulation resistance, initial: > 2 G Ohm; after damp heat test: > 1G Ohm
• Dielectric strength: 1500 V dc
• Rated current: 16 A
• AWG: 2.5 mm²/14 AWG
• Capacitance between contacts: = 4 pF

Mechanical Specifications:

• Lifetime: >1000 cycles
• Insertion / withdrawal force: = 20 N
• Cable O.D. range: 3.5 mm - 8.0 mm

Material Specifications:

• Shell: Zinc diecast ZnAl4Cu1, gal Ni over Cu plating
• Insert: Polyamide PA 6.6 30% GR (glass reinforced)
• Contacts: Brass (CuZn39Pb3)
• Contact surface: gal 2 µm Ag silver
• Strain-relief clamp: POM
• Antikink bushing: PA + PU

Environmental Specifications:

• Temperature range: -30° C to + 80° C
• Flammability: UL 94HB
• Solderability: complies with IEC 68-2-20