The Alesis ASP-2 is the perfect product for keyboard players who want the most realistic pedal action. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially-designed rubber bottom that grips the floor and won't move while you play. This classic-style pedal works with any Alesis digital piano, keyboard or MIDI controller and it also has a polarity switch for compatibility with virtually all other branded keyboards.
Classic and durable design with authentic piano style feel
Hardwired 6' (1.82m) cable with 1/4" (6.35mm) connector
Polarity switch for compatibility with all electronic keyboards
The New Nylgut® is the first product developed and patented by Aquila. The New Nylgut® is neither common Nylon, nor Carbon (Fluocarbon fishing line or PVDF), or a mix of them. It is a plastic compound of three different components
Compared to Nylon, the New Nylgut® produces a better sound and stays in tune better because the moisture absorption is less of .1% against the 2.0% of Nylon normally employed for the musical strings (i.e. Du Pont Tynex® polyammide 6-12).
Due to the higher density, similar to that of pure gut (1.30 gr/cm3), the New Nylgut® produces a better sound than Nylon and it is not so metallic like those of the so- called ‘Carbon’ (Fluorocarbon) PVDF strings. The manufacturer believes the New Nylgut® is probably the first genuine synthetic gut in the world. The New Nylgut® assures:
A better sound than Nylon or PVDF, similar to genuine gut strings;
A more accurate fret intonation due to the well gauged material;
The Aquila Sugar Ukulele strings are made using a blend with a recently discovered plastic material that comes from sugar- cane.
With a transparent look, the sound of these strings is clearly brilliant, clean and prompt.Unlike the Fluorocarbon strings, these strings have an excellent vibrato and a significant timbre variation when playing very close to the bridge and then up on the sound hole. In other words, they contain in their extremes the sweetness and sing ability of Nylon and the clearness and promptness typical of Fluorocarbon.
An important property is the characteristic sustain, which by scientific measurements is superior to any type of string currently available in the market. Another feature checked is the sound projection: our scientific tests have shown that it is superior to that of the Fluorocarbon strings.
Although the surface is extremely smooth, the grip on the fingers is remarkable. The material is very clear and transparent similar to a crystal-glass.
The SPLITMix4 is a fully passive hybrid mixer that offers a wide variety of configurations. Mix 4 stereo input channels down to 1 stereo output, split a stereo input signal to distribute 4 stereo output channels, or combine the configurations for a wide range of applications. You can even configure the SPLITMix4 as 4 stereo input channels thru 4 independent level attenuators to 4 stereo output channels.
Independent stereo level controls are provided on each channel. All 1/4-inch connections are stereo TRS (Tip, Ring, Sleeve) and all channel connections have intelligent switching to allow for a wide variety of configurations. Plugging into a mix input channel removes it from the splitter bus, and plugging into a splitter output channel removes it from the mix bus. Stereo or mono operation is determined by the type of 1/4-inch plug and cabling that you use.
The fully passive design of the SPLITMix4 has no active circuitry to add noise or distortion, and virtually any signal level can be handled. The Level attenuators cover a wide range and offer over 90dB of attenuation and channel isolation. The SPLITMix4 is designed primarily as a line level device with medium input and output impedances.
Four Stereo Input Channels
Independent stereo level controls are provided on each channel
Over 90dB of Attenuation
Passive Design (No Power Supply Required)
Frequency Response............20Hz – 20kHz, +/-1dB
Total Harmonic Distortion..........<0.005% @ 1kHz (typical)
The durable Archtop Hard Case is the updated and improved version of Kala's old hard cases.The Archtop Lid is more structurally sound, preventing contact to the top of the instrument when impacted.
The cushioned handle will help you carry your instrument and case comfortably and the plush interior will hold your instrument firmly in place without scratching or damaging it while the antiqued hardware gives the Archtop Hard Cases a vintage look.
Available in Soprano, Concert, Tenor, and Baritone sizes.
The ART dADB dual active direct box acts as two independent, high quality active interfaces for connecting instrument, line, or speaker level signals to balanced inputs. The high impedance ¼-inch inputs are buffered and converted by extremely low noise active electronics to deliver isolated, balanced, low impedance outputs.
The dADB delivers an extremely flat and wide frequency response even at high input levels, making it a virtually acoustically transparent DI solution.
Input attenuation on each channel allows for a wide range of source signal levels. Independent parallel thru jacks allow for tapping the signal chains. A Ground Lift on each channel allows for totally separate the input and output signal grounds to isolate two systems when required, thus reducing hum and ground-loop noise.
Switchable low pass Bessel filters eliminate high frequency interference. Operating outside of the audio range these complex and effective filter circuits are primarily intended to eliminate radio frequency interference before it gets into the main system. They effectively reduce digital computer noise making the dADB the ideal DI solution for laptops, computer workstations and peripherals when used in stereo PA applications.
The dADB’s active circuitry is powered by phantom power or by an internal 9V battery when external power is not available. Low current draw (less than 7.5 mA) should provide more than 100 hours of operation with a new battery (alkaline recommended).
The compact black all steel case and active design ensure unmatched long-term reliability in Live Sound, Permanent/Fixed Install, D.J., or virtually any PA application.
dADB Dual Active Direct Box
Fully Active Design
Converts High-Z Bal/Unbal Inputs Into 600 ohm Balanced Outputs
Independently Switchable Low Pass Filter on each Channel
Independently Switchable Ground Lift on each Channel
XLR Connectors for Balanced Outputs
Operates on Phantom Power or 9V Battery
Switchable Input Attenuation (0, -20, -40 dB)
Independently Switchable Phase Invert on each Channel
1/4-inch TRS Connector Inputs and Thru Connections
Rugged Steel Case/li>
Frequency Response...............10 Hz–100 kHz +/- 0.5 dB @ +0 dBu
Total Harmonic Distortion.......................................<.05% (typical)
Dynamic Range...................................................> 100 dB (typical)
Channel Separation...............................................> 80 dB (typical)
Maximum Input Level +4, +24, +44 dBu (depending on attenuator setting)
Maximum Output Level............................+6 dBu (battery powered)
GS-1000 Pro Genesis® Series Guitar Stand with Locking Legs and Self-closing Yoke Security Gate The first series of guitar stands that deliver true innovation and musician-helpful features, the Genesis® Series from Ultimate Support all offer a patented leg-locking system for stability, protective padding that won't inherently damage the finish on your guitar, and handy guitar pick storage slots. Whether you're looking for a quality stand for your acoustic, electric, or bass guitar, or even your favorite combo amp, there's a Genesis Series stand from Ultimate Support for you!
JS-TG101 JamStands® Series Tubular Guitar Stand Keep your acoustic, electric, or bass guitar safe onstage or in the studio with this tubular guitar stand. The heavy-duty steel tubing is black powder-coated and covered in protective rubber everywhere your guitar contacts the stand to protect the instrument's finish. The Tubular Guitar Stand holds a single instrument safely and securely. Information, specifications, colors, and materials subject to change.
Buzz Cats are made of Abusite, Mick's Picks exclusive abuse resistant material that's sure to give you a pick with 9 lives, You'll love the clear, bright tone Buzz Cats produce on everything from ritzy git-fiddles to cigar box guitars.
SPINK bass guitar picks are made from Mick's exclusive Toneflex polymer. Spink is 3.0mm thick, very flexible and durable for great playability on bass and other instruments. Autoharp and ukulele players love the SPINK too.
Session players have discovered that SPINK will eliminate the percussive clicking common with standard picks. You won’t need to spend time adjusting the EQ on your bass tracks just to remove unwanted clicking sounds! Try Mick’s SPINK on acoustic guitar for a mellow sound and save wear and tear on you fingers.
Spink is named after a small Irish town fabled to be home to the chubbiest leprechaun in all of the Emerald Isle! Our SPINK is equally as impressive in it’s girth.
Mick’s Picks is the maker of the UKE-1 pick, the #1 composite material ukulele & bass pick sold in the USA.
UKE-1 is now available in our CHROMA colored series.
UKE series picks are made from our exclusive Flextex composite material that makes for a durable and flexible pick that feels great in your hand and actually enhances the tone quality of nylon stringed instruments. These are not the typical thick, hard chunks of felt some other companies sell.
UKE-1 – 2.5mm thick UKE-2 – 3.8MM thick
“When I was a kid I had a ukulele and one of those hard felt picks. I lost that pick somewhere and I was jubilant to be rid of it” Shamus McGuiness
TS/AC (True Simulation of Analog Circuit) Technology.
Clean,6 Distortion types, Flat 3-band EQ, 4 modulation effects, delay and reverb, TAP tempo,
Built-in tuner, AUX IN, Headphones Input.
MIGHTY 8SE is upgraded from the classic Mighty 8 amplifier. Besides Clean tone and 6 distortion types, it also has a Flat position for plugging the acoustic guitar. With 4 modulation effects, delay and reverb, you will find it covers various music styles! The tone is so much improved and you will be surprised that why this little baby is so open sounding!
There are many reasons to have five guitars, and they are all excellent! The new GS7561 is a cost effective way to display a combination of electric and acoustic instruments on stage, in the studio, or at home. Guitars line up in single-file leaning against a padded yoke and cradled by a padded base. Access is unobstructed and instantaneous. The wide rectangular base is stable no matter how many slots are full. And, like you'd expect from On-Stage Stands, portability is built into the design. The backrest folds downwards, making a lightweight, low profile bundle for easy transport.
Genesis® Series Adjustable Professional Guitar Hanger with Self-closing Security Gates – Slatwall and Wall Mount
The GS-10 Pro from Ultimate Support is the perfect guitar hanger for the office, dorm, studio, and music store! Accounting for all body styles, the GS-10 Pro is depth adjustable. What's more, the neck is fully angle adjustable in a 180 degree pattern, so you can set your guitar(s) exactly how you want them. And, whether you're mounting to drywall or slatwall (3-inch and 4-inch), the GS-10 Pro has you covered; included in the box is adapter plates for both! Finally, the GS-10 Pro features self-closing security gates and an innovative headstock well design that ensures your guitar's headstock won't fall out.
Depth- and angle-adjustable
Drywall adapter included
3" and 4" slatwall adapter also included!
Patent-pending design includes self-closing security gates and innovative headstock well