FAP42T combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42T a perfect choice for low ceilings.

The FAP42T will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system.

The FAP42T is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.

Includes

• Speaker
• Support Ring
• Support Rails for Suspended Ceiling

Applications

• Ceiling Installation
• Music
• Sound Reinforcement

Features

• 4 Pole Detachable "Phoenix" Style Connector Allows Easy Pre-Wiring and is Convenient for Daisy Chaining Additional Strategy Full Range Speakers or Subwoofers
• Easy Installation in Drop Tile or Sheetrock Ceilings via C-ring/V-rail Tile Bridge and "Dog Leg" Mounting System (Included)
• Enhanced Quality 70.7V/100V Internal Transformers Minimize Insertion Loss and Maintain Low Frequency Response While Providing increased Output for Higher SPL Applications
• Extended Low Frequency Response from the 285 Cubic Inch Optimally Tuned and Ported Deep Drawn Galvanized Steel Enclosure
• Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Includes Transformer Bypass Setting for 8 ohm Direct Coupled Operation
• Perfect Companion with the FAPSUB Subwoofer System When Sub Bass is Required
• Press-Fit Grill Blends Perfectly into Contemporary Architecture

Specifications

• Impedance:……….1, 2, 4, 8, 16 Watts & 8Ω
• Speaker Type:……………Coaxial
• Output Connection:………..4 Pole Detachable “Phoenix” Style Connector
• Frequency Response:..........75Hz - 20kHz
• Certified to Safety Listing:……………….UL 1480
• Diameter:………………10 1/2" (26.67 cm)
• Weight:...................... 3 Lbs
• Sensitivity:.................88dB Average
• Switch:………………….Impedance Selector

All AtlasIED Strategy Series loudspeaker systems are designed to provide high fidelity, long life and installation convenience for commercial and residential applications. Because of their weather-resistant properties they are perfect for use indoors or out.

The SM42T includes a 4" woofer and 1" tweeter as well as an integrated 70.7V / 100V transformer and 8Ω bypass for direct coupled applications.

Use surface-mount AtlasIED SM42T Series loudspeaker systems for commercial, professional and residential applications or where high-fidelity sound and weather-resistance is desired. Full-range frequency response makes these systems ideal for indoor and outdoor installation, in monaural and stereo foreground or background music systems, and for applications in boutiques/shops, restaurants/cafes, corporate AV applications and houses of worship. Multi-position, C-shaped mounting bracket and rugged construction provide optimum installation flexibility and assurance of long-term service.

Includes

• SM42T Speaker
• Color Matched “C” Mounting Bracket
• Color Matched Knobs

Applications

• Commercial, Professional and Residential Applications
• Indoor and Outdoor Locations

Features

• Compact 2-way Loudspeaker System
• 1/4”-20 Hardware
• 4” Woofer
• Available in Black or White

Specifications

• Power Rating……………..16 Watts RMS
• Transformer Taps…….2,4,8 & 16 Watts @ 70V and 8ohm Bypass
• Input Connection:………..Screw Terminal
• Frequency Response:……….115Hz-16kHz
• Sensitivity………….88dB
• Height………….7”
• Width…………..5”
• Depth………………5 15/16”

Environment-resistant SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and FerroFluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director.

This design provides smooth, even sound coverage (90°H x 90°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. The SM52T includes an internally mounted 30 Watt 70.7V/100V line matching transformer with 8Ω bypass and screwdriver adjustable tap selection for use in distributed sound applications.

To withstand the harshest environments, the new Strategy Series SM52T surface mount loudspeakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware.

The Strategy Series loudspeaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM52T. Care should also be taken to prevent the SM52T from being exposed to direct precipitation.

A 5/8"-27 threaded hole is provided on the C-bracket to allow the SM52T series loudspeaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3/8" OC brass inserts are also provided on the rear of the SM52T to accommodate an OMNIMOUNT bracket. All inserts for mounting knobs are standard 1/4"-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or "one-way" hardware (not sold by AtlasIED).

Input connectors include a two pole barrier strip with wire capture "caps" capable of accepting up to (2) #14AWG cable. .94, 1.9, 3.7, 7.5, 15, 30 watt and 8Ω bypass taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Can be painted to accommodate any architectural considerations.

Includes

• Atlas SM52T-B Speaker
• Wall Mount Bracket w/ knobs
• Manual

Applications

• Background/Foreground Music
• Indoors/Outdoors

Features

• Includes internal, high efficiency 70.7V / 100V transformer (may be bypassed for 8Ω operation)
• Barrier strip input with weather resistant cover
• Bracket included for wall mounting
• Also compatible with optional mounting systems from Atlas Sound and others
• Atlas Sound SMBALLMOUNT (indoor use only) or OmnimountTM 10.0 series
• Other mounting systems (single shaft or dual hole mount) may be used to match 1⁄4"-20 insert(s) on rear of speaker.
• Dual hole mounting systems must match 23⁄8" (60mm) OC, 1⁄4"-20 insert spacing.
• Mounting system must be rated to support at least 10 lbs (4.5Kg)

Specifications

• Speaker Type………………Surface Mount
• Input Connection:………Screw Terminal
• Frequency Response:……….20Hz-20kHz
• Power Taps .94, 1.9, 3.7, 7.5, 15, 30(70 Volt) & 8 Ohm Bypass
• Sensitivity………..............………90dB
• Height:………………..........….10 3/16”
• Width:……....................………..6 7/8”
• Depth……………...............…….5 7/8”
• Shipping Weight…………….. 8.50 lbs

The SM8SUB70 8" subwoofer system is perfect for restaurants, bars, and high-fashion retail outlets. The system utilizes a 8" woofer housed in a 915 cubic inch multi-angle, flyable, wood enclosure system to provide extended low frequency response with a wide variety of mounting options. (Not for outdoor use!).

Inserts are included for use with 1/4"-20 drop forge eyebolts, optional SM8CBKT-B /-W mounting bracket. An 18 dB/octave three-pole passive crossover eliminates the need for a separate electronic network or dedicated amplification to power the loudspeaker. Its low crossover point (120Hz) nearly eliminates localization, allowing a designer to boundary-load the SM8SUB70-B near a wall or into a corner for maximum output, while maintaining even coverage throughout the space.

A premium 70.7V transformer allows the SM8SUB70 to be paralleled with any 70.7V commercial audio system to provide extended low frequency response and more overall audio impact for foreground music systems. (Unit is also 8ohm compatible). Perfect for use with other SM series full range loudspeakers Available In black (SM8CXT-B) or White (SM8CXT-W)

Includes

• (1) Subwoofer

Applications

• Distributed Music Systems
• Features

Features

• Attractive, yet Heavy-Duty Grille Assembly
• Barrier Strip Input for 70.7/100V/8 Ohm or Parallel 4 Pole Speak-ON™ Input for 8 Ohm Operation Only
• Durable Black, Rough-Coat Finish
• Fuse Protection for Driver
• Includes Internal High Efficiency 60 Watt 70.7/100V Transformer (May be Bypassed for 8 Ohm Operation)
• Multiple 1/4"-20 Inserts, Providing Fly Points for a Variety of Mounting Configurations
• Optional Bracket for Wall Mounting
• Unique Input Panel Allows Use of Standard 4" Square Box Cover (Raco 753 or eq.) for Applications Where Flex Conduit is Required for Termination

Specifications

• Frequency Response………..55Hz-100Hz
• Speaker Type…………….Sub
• Dispersion:………..Omni
• Width:……….10 5/8”
• Height…………..15 1/2”

• Ideal for paging and talk-back communications in noisy environments such as drive-thru fast food, banking and self-serve stations.
• Conservatively rated at 10 watts continuous duty.
• Compression driver uses 1-1/2" voice coil and rugged phenolic diaphragm.
• Weather and corrosion resistant design uses stainless fasteners. Plating on driver meets 96 hour salt spray test. Other parts are made of high impact ABS.
• Black color and no front label helps concealment in a menu board or pedestal mounting.
• Adjustable mounting base will attach to a 3-inch electrical box.
• Flange holes allow for recessed mounting.
• Restricted bandwidth and coverage angle for good penetration and intelligibility.
• Excellent sensitivity as a microphone in a talk-back system.
• Minimal engine noise pickup when used as a talk-back microphone.

Multi-Baffle speaker systems designed to assure full frequency response. Large housing enhances bass response. Suspend baffle down to desired height.

• Use a larger number of speakers at low levels properly placed to direct sound pleasantly
• Priced to make the multi-baffle system an economical installation
• Ported design assures full frequency response. The bass is enhanced not destroyed

• Input: 25V or 70.7V line
• Power Taps: 4, 2, 1 & 1/2 watts
• Frequency Range: 100-14,000 Hz
• Sensitivity: 96 dB
• Dimensions: 14'' Dia. x 10-1/4'' D.

The C120/70 is a bass reflex enclosure with a tuned port and a 5" woofer, which provides improved bass performance over conventional 5" woofer enclosures. Removing the press-fit grille gives access to the eyeball tweeter, which can be swiveled to suit various listening positions. The C120/70 will handle 100 Watts of continuous music and is accurate from 75 Hz to over 19 kHz.

The C120/70 is designed to allow a multitude of mounting options including a 'press-fit' microphone stand mount, integral key hole screw-slots or the provided metal U-bracket which allows it to be angled up, down or sideways depending on the mounting orientation. For maximum convenience in live or mobile applications, the back plate features push terminals and dual 1/4" inputs. The C120/70 is available in a low-reflectance black

The integrated 70V 'matching transformer' allows multiple C120/70's to be connected together without danger of overloading the power amplifier due to impedance drop. The user has a choice of three sensitivity settings (10W, 20W, 30W or bypass) selected via a rotary switch located on the rear panel of the speaker, allowing convenient adjustment of the relative volumes of multiple interconnected cabinets.

Includes

• C120/70 Speaker
• Mounting U-Bracket

Features

• 100 watt Bass Reflex Two-Way
• 5-inch Woofer / Aimable Swivel 1-inch Mylar Tweeter
• ¼-inch and Push Terminal Inputs
• ABS Plastic Cabinet and Metal Grille
• Mounting U-Bracket Included

Specifications

• System Type:..........................................2-Way Passive
• Program Power:..............................................100 Watts
• Nominal Impedance:...........10W,20W30W or 8 ohm Bypass
• Sensitivity 1Watt/1M:.............................................94dB
• Max SPL:............................................................104(dB)
• Frequency Response(+/- 3dB):.......................75-19,000
• Drivers:...........................................................Tweeter, 5"
• HF Driver:....................................Aimable Mylar Tweeter
• HF Dispersion(°Hx°V):..........................................90 x 90
• LF Driver(s):.............................................................5 inch
• Dimensions..........................................6.5"x6.75"x10.25"
• Weight:...................................................................4.7 lbs