Commercial + Installed Sound

Atlas Sound Ceiling Speaker SD72W

The loudspeaker used in the SD72W is the next generation of Atlas high performance cone loudspeakers, very similar to the preceding C-Series loudspeakers. The similarity in the sonic qualities ensures that contractors and designers who have worked with the AtlasIED C-Series in the past will know exactly what to expect when they use the SD72W.

Model SD72W is a dual cone, 25 watt 8" (205mm) loudspeaker with a 10oz. (260g) ceramic magnet. It includes a curvilinear, treated paper cone for lower harmonic distortion. The loudspeaker is also equipped with a full 1" diameter copper voice coil with a black anodized aluminum former for better power dissipation. Package includes factory installed 25/70.7V line matching transformer with tap selections ranging from .25 to 5 watts.

Model SD72W operates within a frequency response range of 45Hz - 19kHz (nominal) with a sensitivity of 97dB and a dispersion angle of 105°.

The SD72W includes a factory installed CRS baffle with concealed loudspeaker mounting studs and includes screw mount hardware. The SD72W baffle features standard mounting holes to accommodate the majority of AtlasIED 8" tile bridges, mounting rings and enclosures. When specifying mounting hardware be advised that the dimensions of the SD72W baffle match the AtlasIED Model 62-8. The baffle finish is white powder coat epoxy.
$32.99
Sale

CAD 40-348 Dual Female 3-pin XLR Wall Plate

Wall plate with dual female 3-pin panel XLR type connectors. Single duplex style stainless steel wall plate with mounting screws.
$13.00 $19.00

Atlas FAP42T (Priced and Sold as Pairs)

FAP42T combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42T a perfect choice for low ceilings.

The FAP42T will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system.

The FAP42T is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.

Includes

  • Speaker
  • Support Ring
  • Support Rails for Suspended Ceiling

Applications

  • Ceiling Installation
  • Music
  • Sound Reinforcement

Features

  • 4 Pole Detachable "Phoenix" Style Connector Allows Easy Pre-Wiring and is Convenient for Daisy Chaining Additional Strategy Full Range Speakers or Subwoofers
  • Easy Installation in Drop Tile or Sheetrock Ceilings via C-ring/V-rail Tile Bridge and "Dog Leg" Mounting System (Included)
  • Enhanced Quality 70.7V/100V Internal Transformers Minimize Insertion Loss and Maintain Low Frequency Response While Providing increased Output for Higher SPL Applications
  • Extended Low Frequency Response from the 285 Cubic Inch Optimally Tuned and Ported Deep Drawn Galvanized Steel Enclosure
  • Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Includes Transformer Bypass Setting for 8 ohm Direct Coupled Operation
  • Perfect Companion with the FAPSUB Subwoofer System When Sub Bass is Required
  • Press-Fit Grill Blends Perfectly into Contemporary Architecture

Specifications

  • Impedance:……….1, 2, 4, 8, 16 Watts & 8Ω
  • Speaker Type:……………Coaxial
  • Output Connection:………..4 Pole Detachable “Phoenix” Style Connector
  • Frequency Response:..........75Hz - 20kHz
  • Certified to Safety Listing:……………….UL 1480
  • Diameter:………………10 1/2" (26.67 cm)
  • Weight:...................... 3 Lbs
  • Sensitivity:.................88dB Average
  • Switch:………………….Impedance Selector
$104.99

Scroll To Top