Small and compact, and engineered for reliability, the AtlasIED MA40G amplifier is the perfect choice for distributed business paging and background music (BGM) systems, and small to medium speech privacy systems.

It provides 40W into a 70.7V/100V line and has three total inputs including a balanced mic/line input featuring phantom power and variable mute sensitivity control as well as two unbalanced, summing line level inputs. Additional features include Removable Level Controls with set it and forget it security cover, contact closure mute terminals, and a global (100VAC-240VAC) power supply.

The MA series of amplifiers are part of a new line from AtlasIED that are designed from the ground up and include the important features professional installation personnel require to meet or exceed their customer's expectations.

Includes

• Amplifier
• Power Cord
• Input connectors
• Instruction Manual

Applications

• Business Music
• Paging Systems

Features

• 3 Inputs (1) balanced mic/line (2) Unbalanced Summing Line-level via RCA connectors
• Inputs 2 and/or 3 may be muted via contact closure or adjustable voice activated mute initiated from channel 1.

FAP42T combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42T a perfect choice for low ceilings.

The FAP42T will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system.

The FAP42T is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.

Includes

• Speaker
• Support Ring
• Support Rails for Suspended Ceiling

Applications

• Ceiling Installation
• Music
• Sound Reinforcement

Features

• 4 Pole Detachable "Phoenix" Style Connector Allows Easy Pre-Wiring and is Convenient for Daisy Chaining Additional Strategy Full Range Speakers or Subwoofers
• Easy Installation in Drop Tile or Sheetrock Ceilings via C-ring/V-rail Tile Bridge and "Dog Leg" Mounting System (Included)
• Enhanced Quality 70.7V/100V Internal Transformers Minimize Insertion Loss and Maintain Low Frequency Response While Providing increased Output for Higher SPL Applications
• Extended Low Frequency Response from the 285 Cubic Inch Optimally Tuned and Ported Deep Drawn Galvanized Steel Enclosure
• Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Includes Transformer Bypass Setting for 8 ohm Direct Coupled Operation
• Perfect Companion with the FAPSUB Subwoofer System When Sub Bass is Required
• Press-Fit Grill Blends Perfectly into Contemporary Architecture

Specifications

• Impedance:……….1, 2, 4, 8, 16 Watts & 8Ω
• Speaker Type:……………Coaxial
• Output Connection:………..4 Pole Detachable “Phoenix” Style Connector
• Frequency Response:..........75Hz - 20kHz
• Certified to Safety Listing:……………….UL 1480
• Diameter:………………10 1/2" (26.67 cm)
• Weight:...................... 3 Lbs
• Sensitivity:.................88dB Average
• Switch:………………….Impedance Selector

Environment-resistant SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and FerroFluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director.

This design provides smooth, even sound coverage (90°H x 90°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. The SM52T includes an internally mounted 30 Watt 70.7V/100V line matching transformer with 8Ω bypass and screwdriver adjustable tap selection for use in distributed sound applications.

To withstand the harshest environments, the new Strategy Series SM52T surface mount loudspeakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware.

The Strategy Series loudspeaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM52T. Care should also be taken to prevent the SM52T from being exposed to direct precipitation.

A 5/8"-27 threaded hole is provided on the C-bracket to allow the SM52T series loudspeaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3/8" OC brass inserts are also provided on the rear of the SM52T to accommodate an OMNIMOUNT bracket. All inserts for mounting knobs are standard 1/4"-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or "one-way" hardware (not sold by AtlasIED).

Input connectors include a two pole barrier strip with wire capture "caps" capable of accepting up to (2) #14AWG cable. .94, 1.9, 3.7, 7.5, 15, 30 watt and 8Ω bypass taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Can be painted to accommodate any architectural considerations.

Includes

• Atlas SM52T-B Speaker
• Wall Mount Bracket w/ knobs
• Manual

Applications

• Background/Foreground Music
• Indoors/Outdoors

Features

• Includes internal, high efficiency 70.7V / 100V transformer (may be bypassed for 8Ω operation)
• Barrier strip input with weather resistant cover
• Bracket included for wall mounting
• Also compatible with optional mounting systems from Atlas Sound and others
• Atlas Sound SMBALLMOUNT (indoor use only) or OmnimountTM 10.0 series
• Other mounting systems (single shaft or dual hole mount) may be used to match 1⁄4"-20 insert(s) on rear of speaker.
• Dual hole mounting systems must match 23⁄8" (60mm) OC, 1⁄4"-20 insert spacing.
• Mounting system must be rated to support at least 10 lbs (4.5Kg)

Specifications

• Speaker Type………………Surface Mount
• Input Connection:………Screw Terminal
• Frequency Response:……….20Hz-20kHz
• Power Taps .94, 1.9, 3.7, 7.5, 15, 30(70 Volt) & 8 Ohm Bypass
• Sensitivity………..............………90dB
• Height:………………..........….10 3/16”
• Width:……....................………..6 7/8”
• Depth……………...............…….5 7/8”
• Shipping Weight…………….. 8.50 lbs

The 119S19 is a dynamic cardioid microphone, designed especially for gooseneck mounting in quality sound reinforcement and communication installations. A slightly rising high frequency response and a gentle low frequency roll-off, assures excellent voice reproduction.

A superior cardioid directional pattern minimizes feedback, background noise, reverberation, off-axis coloration and placement problems. A new internal vibration isolation system, consisting of a special rubber mounting ring as a support for the element, reduces gooseneck, stand and handling noise. An effective multi-stage blast filter controls breath “pop” and wind disturbances.

The 119S-19 has a high quality push-to-talk switch. The 119S-19 has a low impedance output and is supplied with a 1.7m (5.5ft.) of rugged two conductor shielded cable. The 119S-19 is extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service. Available in 19-inch heavy duty chrome gooseneck.

Includes

• CAD 119S-19 Microphone
• 5.5' Cable

Applications

• Podiums
• Public Speaking

Features

• On/off switch wired normally open
• 19" heavy-duty gooseneck
• 2 3/4" flange
• 6’ heavy duty cable
• Polished chrome finish

Specifications

• Operating Principle:.........Moving Coil Dynamic
• Polar Pattern:...............Cardioid
• Output Connection:...........Four(4) wires; 5.5' Cable
• Frequency Response:..........12-12,000 Hz
• Phantom Power Requirements:..NA
• Impedance:...................600 ohms
• Dimensions:..................1.25" x 24"
• Weight:......................850g
• Sensitivity:.................-57dBV (1.6mV) @ 1Pa
• Switch:......................Push-to-talk Switch

The 119L-19 is a dynamic cardioid microphone, designed especially for gooseneck mounting in quality sound reinforcement and communication installations. A slightly rising high frequency response and a gentle low frequency roll-off, assures excellent voice reproduction.

A superior cardioid directional pattern minimizes feedback, background noise, reverberation, off-axis coloration and placement problems. A new internal vibration isolation system, consisting of a special rubber-mounting ring as a support for the element, reduces gooseneck, stand and handling noise.

An effective multi-stage blast filter controls breath “pop” and wind disturbances. The 119L-19 has a low impedance output and is supplied with a 1.7m (5.5ft.) of rugged two conductor shielded cable. The 119L-19 is extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service.

Includes

• CAD 119L-19 Microphone
• 5.5' Cable

Applications

• Podiums
• Public Speaking

Features

• 19" heavy-duty gooseneck
• 2 3/4" flange
• 6' heavy duty cable
• Polished chrome finish

Specifications

• Operating Principle:.........Dynamic
• Polar Pattern:...............Cardioid
• Output Connection:...........Two(2) Wires; 5.5' Cable
• Frequency Response:..........120-12,00 Hz
• Phantom Power Requirements:..NA
• Impedance:...................500 ohms
• Dimensions:..................1.25" x 23.25"
• Weight:......................340g
• Sensitivity:.................-57dBV (1.65) mV/Pa
• Switch:......................No On/Off Switch

Includes

• CAD 119L-19 Microphone
• 5.5' Cable

Applications

• Podiums
• Public Speaking

Features

• 19" heavy-duty gooseneck
• 2 3/4" flange
• 5.5' cable
• Polished chrome finish

Specifications

• Operating Principle:.........Moving Coil Dynamic
• Polar Pattern:...............Cardioid
• Output Connection:...........Balanced, two wire, unterminated
• Frequency Response:..........80-15,000 Hz
• Phantom Power Requirements:..NA
• Impedance:...................500 ohms
• Dimensions:..................1.25" x 24"
• Weight:......................12 oz
• Sensitivity:.................-60dBV (1.4mV) @ 1Pa
• Switch:......................none

The AMC105SNO-19 microphone is a cost effective, push button, omnidirectional dynamic designed specially for fixed or gooseneck mounting in quality sound installations. These microphones are extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service. A smooth wide band frequency response with a slight “presence” boost at 2 kHz gives a natural, crisp and highly intelligible sound.

Includes

• CAD AMC105SNO-19 Microphone
• 7' Cable

Applications

• Podiums
• Public Speaking

Specifications

• Operating Principle:.........Moving Coil Dynamic
• Polar Pattern:...............Omnidirectional
• Output Connection:...........Four (4) wires; 7' Cable
• Frequency Response:..........150-10,000 Hz
• Phantom Power Requirements:..NA
• Impedance:...................550 ohms
• Dimensions:..................23 1/2" x 1 3/8"
• Weight:......................170g/6oz
• Sensitivity:.................-56 dBV (1.6 mV) @ 1 Pa
• Switch:......................Push-to-talk Switch

Multi-Baffle speaker systems designed to assure full frequency response. Large housing enhances bass response. Suspend baffle down to desired height.

• Use a larger number of speakers at low levels properly placed to direct sound pleasantly
• Priced to make the multi-baffle system an economical installation
• Ported design assures full frequency response. The bass is enhanced not destroyed

• Input: 25V or 70.7V line
• Power Taps: 4, 2, 1 & 1/2 watts
• Frequency Range: 100-14,000 Hz
• Sensitivity: 96 dB
• Dimensions: 14'' Dia. x 10-1/4'' D.

The 611L is designed for hand-held applications in quality sound installations. The frequency response, especially tailored for voice communications, provides a crisp, clear, highly intelligible sound.

Includes

• Microphone
• Instruction Sheet

Applications

• Paging
• Security
• Mobile Communications
• Emergency

Features

• Integral DPDT Switch
• Rugged Cable

Specifications

• Operating Principle:Moving Coil Dynamic
• Polar Pattern:Omnidirectional
• Frequency Response:200 Hz to 6.5 kHz
• Sensitivity:-56 dBV (1.6 mV) @ 1 Pa
• Impedance:360 Ohms
• Cable:Four conductor, two shielded, permanently attached, heavy duty, neoprene jacketed coil cord that extends to 1.8 m (6 ft.)
• Switch:Operated by press-to-talk lever, 2PDT long life, trouble free switch with spring return. Wired normally open.
• Housing:Durable molded black Cycolac
• Dimensions:100mm (3-15/16") high x 75.4mm (2-3/32) wide x 54.8mm (2-5/32") deep
• Weighty:227 grams (8 oz.)

All AtlasIED Strategy Series loudspeaker systems are designed to provide high fidelity, long life and installation convenience for commercial and residential applications. Because of their weather-resistant properties they are perfect for use indoors or out.

The SM42T includes a 4" woofer and 1" tweeter as well as an integrated 70.7V / 100V transformer and 8Ω bypass for direct coupled applications.

Use surface-mount AtlasIED SM42T Series loudspeaker systems for commercial, professional and residential applications or where high-fidelity sound and weather-resistance is desired. Full-range frequency response makes these systems ideal for indoor and outdoor installation, in monaural and stereo foreground or background music systems, and for applications in boutiques/shops, restaurants/cafes, corporate AV applications and houses of worship. Multi-position, C-shaped mounting bracket and rugged construction provide optimum installation flexibility and assurance of long-term service.

Includes

• SM42T Speaker
• Color Matched “C” Mounting Bracket
• Color Matched Knobs

Applications

• Commercial, Professional and Residential Applications
• Indoor and Outdoor Locations

Features

• Compact 2-way Loudspeaker System
• 1/4”-20 Hardware
• 4” Woofer
• Available in Black or White

Specifications

• Power Rating……………..16 Watts RMS
• Transformer Taps…….2,4,8 & 16 Watts @ 70V and 8ohm Bypass
• Input Connection:………..Screw Terminal
• Frequency Response:……….115Hz-16kHz
• Sensitivity………….88dB
• Height………….7”
• Width…………..5”
• Depth………………5 15/16”

• Ideal for paging and talk-back communications in noisy environments such as drive-thru fast food, banking and self-serve stations.
• Conservatively rated at 10 watts continuous duty.
• Compression driver uses 1-1/2" voice coil and rugged phenolic diaphragm.
• Weather and corrosion resistant design uses stainless fasteners. Plating on driver meets 96 hour salt spray test. Other parts are made of high impact ABS.
• Black color and no front label helps concealment in a menu board or pedestal mounting.
• Adjustable mounting base will attach to a 3-inch electrical box.
• Flange holes allow for recessed mounting.
• Restricted bandwidth and coverage angle for good penetration and intelligibility.
• Excellent sensitivity as a microphone in a talk-back system.
• Minimal engine noise pickup when used as a talk-back microphone.

Buy 2 and get free ground shipping within US!

The Astatic Model WM-625 is an omnidirectional dynamic microphone designed especially for mounting to wall boxes. The frequency response is shaped to provide crisp, clear, highly intelligible voice communications. Used in many drive thru intercoms.

Includes

Plate Mounted Microphone
Dress Screws
Instruction/Installation Sheet
Applications

Security
Drive Thru Intercoms
Features

Frequency Response is optimized for speech applications
Low Frequency roll-off reduces engine noise
Specifications

Element Dynamic
Pattern Omnidirectional
Frequency Response 150-4500Hz
Output Level -62 dB(0dB = 1 volt/microbar
Impedance 500 ohms
Your Choice of Switch or No Switch
Dimensions 3.28128"(H)x2.765625"(W)x1.078125"(D)
Weight 3.6 oz
Finish Brushed Stainless Steel

High-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems.

Attenuation is accomplished in ten make before break steps plus positive off position. (No stop between maximum and off position to prevent switch damage).

Contacts are silver plated for noise-free operation.

Features a removable terminal block. Includes stainless steel plate, with stamped and filled or screen printed dial scale and a skirted black knob.

VT Series open perforated panels provide the highest open area of all our vent panels to allow superior ventilation.

• Sturdy steel construction

• Flanged Panel

• 64% open area

• Flat black powder coat

The most aesthetic blank panels available with a black brushed and anodized finish. Complements RSH4A custom rackshelves and other anodized accessories.

• Flat 11-gauge aluminum construction is easy to machine
• Black brushed and anodized finish

Eliminate the prospect of tampering with these tough security covers. Offered in regular perforation styles, each cover is 1” deep. Includes installed rubber edging that won’t mar the equipment you’re trying to protect. To enhance the level of security, use the patented Guardian Series™ security bit and HSK rack screws

• Prevents tampering with tough 1” deep metal cover
• Large perforation allows clear view of equipment settings
• Includes installed rubber edging that won’t mar equipment
• Compatible with security rack screws for enhanced security

VTP series vent panels feature a horizontal vent design and have a black brushed and anodized finish to complement RSH Series rackshelves and other anodized accessories. • Aluminum construction

• Flanged Panel • 20% open area

• Black brushed anodized

1 Rack Space

Atlas Sound Panels Provide Aesthetic Continuity and Security for Unfilled Cabinet Spaces

Includes Oblong Mounting Holes on E.I.A. Universal Spacing for Adjustment Flexibility

Solid Model Offers Dust Protection

Stocked in Textured Black Epoxy