CAD

Sale

CAD D10

The D10 is a cardioid, moving-coil dynamic microphone specifically designed and carefully equalized for kick drum capture and reinforcement. Special attention has been given to enhancing “thump”, “crack” and “click” while reducing “boxiness”.

Although designed for kick drum, excellent results are also obtained when used on floor toms, electric guitar and electric bass cabinets.

The die-cast metal body and hardened protective steel screen provide rugged durability. Integrated swivel mount is included.

Includes

  • D10 Microphone
  • Integral Micstand-mount

Applications

  • Kick Drum
  • Floor Toms
  • Guitar and Bass Cabinets

Features

  • Diecast Metal Body
  • Hardened Steel Screen

Specifications

  • Operating Principle:......................Dynamic
  • Polar Pattern:..............................Cardioid
  • Output Connection:............................XLR
  • Frequency Response:............50Hz-16kHz
  • Phantom Power Requirements:...........None
  • Impedance:.................................60 Ohms
  • Dimensions:...............................4.2" x 2.4"
  • Weight:........................................12.75 oz
  • Sensitivity:...........-67dBV (.45mV) @ 1 Pa
  • Switch:...............................................None
  • RoHS.........................................Compliant
$36.99 $69.00

Cad Stage7 Drum Mics with 7 20' XLR Cables

7 Piece Drum Mic Pack

Applications

Percussion Miking for recording or performance

Includes

  • (3) D29 Dynamic Tom Mics with integrated drum clips
  • (1) D19 Dynamic Snare Mic with integrated drum clips
  • (1) D10 Dynamic Kickdrum Mic with clip
  • (2) C9 Overhead Condensers
  • (7) 20' XLR-XLR Mic Cables
  • Protective carrying case included.

 

Specifications

Specifications

D10

D29

D19

C9

Operating Principle

Moving Coil Dynamic

Moving Coil Dynamic

Moving Coil Dynamic

Condenser

Polar Pattern

Cardioid

Cardioid

Supercardioid

Cardioid

Frequency Response

50 Hz to 16 kHz

90 Hz to 13 kHz

90 Hz to 14 kHz

40 Hz to 13 kHz

Sensitivity

-67 dBV (0.45 mV) @ 1 Pa

-53 dBV (2.2 mV) @ 1 Pa

-56 dBV (1.6 mV) @ 1 Pa

-41 dBV (8.9 mV) @ 1 Pa

Impedance

60 ohms

560 ohms

300 ohms

230 ohms

Hi-Pass

NA

NA

NA

200 Hz, 6 dB/oct

Attenuator

NA

NA

NA

10 dB

Power Requirements

NA

NA

NA

P12, P24, P48, 11mA(P48)

Connector

3 pin XLR type

3 pin XLR type

3 pin XLR type

3 pin XLR type

Application

Kick Drum, Floor Toms, Guitar Cabinets, Bass Cabinets

Brass, Guitar Cabinets, Bass Cabinets, Snare Drum, Rack/Floor Toms.

Brass, Guitar Cabinets, Bass Cabinets, Snare Drum.

Acoustic Instrument, Strings, Cymbals/Overheads, Hi-hat.

Specifications are subject to change without notice.


 

$234.99
Sale

CAD D29

Cardioid Dynamic Tom Drum Microphone

The D29 is a cardio id, moving-coil dynamic microphone specifically designed for the capture and reinforcement of tom-tom drums and other acoustic percussive instruments.

The cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. Although designed with percussion in mind, excellent results are also obtained when used on on most electrical and acoustical instruments.

The integrated drum clip is designed to facilitate rapid, optimal placement.

Includes

  • D29 Microphone
  • Integrated Drum Clip

Applications

  • Rack toms
  • Floor Toms
  • Guitar/Bass Cabinets
  • Electric and Acoustic Instruments

Features

  • Response Peak in upper midrange
  • Integrated Drum Clip

Specifications

  • Operating Principle:.....................Dynamic
  • Polar Pattern:............................Cardioid
  • Output Connection:... ...............XLR
  • Frequency Response:..............90Hz-13kHz
  • Phantom Power Requirements:...None
  • Impedance:...............................560 Ohms
  • Dimensions:..............................3.48" x 1.65"
  • Weight:.....................................6.,5 oz
  • Sensitivity:...............................-53dBV (2.2mV) @ 1 Pa
  • Switch:.....................................None
  • RoHS.......................................Compliant
$28.99 $40.00
Sale

CAD C9

Packaged in a small, rugged, all-metal body, the C9 cardioid condenser microphone is designed primarily for overhead drum miking.

The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Transformerless line-driver circuitry improves transient agility while maintaining phase alignment for clear detail.

The integral polymer isolation mechanically decouples the capsule from the body minimizing acoustical conduction from the floor through the mic stand.

Although designed for drum overheads, the C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments.

Shock-isolating swivel mount is included. P12 (12V), P24 (24V), or P48 (48V) phantom power is required.

The new upgrade from the older technology CM 217.

Includes

  • CAD C9 Microphone
  • Mic Clip

Applications

  • Overheads
  • Classical Strings
  • Acoustic Guitar
  • Folk Instruments

Features

  • Excellent Isolation
  • Small, rugged design

Specifications

  • Operating Principle:..........Condenser
  • Polar Pattern:...............Cardioid
  • Output Connection:...........XLR
  • Frequency Response:..........40Hz-13kHz
  • Phantom Power Requirements:...Phantom Power 12-48V 2.2ma
  • Impedance:...................150 Ohms
  • Dimensions:..................4" x .75"
  • Weight:......................1.12 oz
  • Sensitivity:.................-41dBV (2.2mV) @ 1Pa
  • RoHS.........................Compliant
$29.99 $49.00
Sale

CAD U37 USB Mic with Filter

Looking for a USB mic set to record onto your computer? This set works great for Pod casts, live applications or recording purposes and comes with a desk stand plus a pop filter to assist with all of your recording needs.

Record directly to your computer!

Includes

  • (1) U37 Studio USB Condenser Microphone w/desk stand

  • (1) 10' USB Microphone Cable

Specifications

U37

Capabilities

  • Record studio-quality audio directly to your computer

  • Excellent for vocals and instruments

  • Pod-cast over the Internet

  • Create your own audio for video

  • Record your own songs

  • Simply plug in and start recording

  • Windows and Macintosh compatible

Features & Benefits

  • Large condenser microphone element for warm, rich recordings

  • Cardioid pick-up pattern minimizes background noise and isolates the main sound source

  • Smooth, extended frequency response is excellent for singing, speech and instruments

  • -10dB overload-protection switch minimizes distortion from loud sound sources

  • Bass-reduction switch reduces room noise

  • Side-address design used by broadcast, TV and recording studios

  • Ten-foot USB cable for flexible mic placement

  • Desktop mic stand included

Applications

Studio Vocals, Speech, Instruments, Pod-casts, Desktop Recording

 

 

$69.00 $99.00
Sale

CAD D19

Supercardioid Dynamic Percussion Microphone

The D19 is a supercardioid, moving-coil dynamic microphone specifically designed for the capture and reinforcement of snare drum and other acoustic percussive instruments.

The supercardioid polar pattern provides off-axis rejection crucial for on-stage clarity. Although designed with percussion in mind, excellent results are also obtained when used on on most electrical and acoustical instruments.

The integral drum clip is designed to facilitate rapid, optimal placement.

Includes

  • CAD D19 Microphone
  • Integral Mic Clip

Applications

  • Snare Drums
  • Guitar/Bass Cabinets
  • Electric and Acoustic Instruments

Features

  • Smooth Presence Peak
  • Integral Mic Clip

Specifications

  • Operating Principle:.....................Dynamic
  • Polar Pattern:....................Supercardioid
  • Output Connection:...........................XLR
  • Frequency Response:..........90Hz-14kHz
  • Phantom Power Requirements:.........None
  • Impedance:..............................300 Ohms
  • Dimensions:..........................3.48" x 1.65"
  • Weight:...........................................6.5 oz
  • Sensitivity:.................-56dBV (1.5mV) @ 1 Pa
  • Switch:..............................................None
  • RoHS........................................Compliant
$28.99 $49.00
Sale

CAD GXL2200 Mic Set

We think you'll like everything this microphone set has to offer!

This is a must buy for anyone interested in using for live applications or recording purposes, without breaking the bank. While most offer only the GXL2200 for this price, we also include a boom stand, pop filter and 25 ft cable as well.

If you have wanted to purchase everything for one great price, now is the time to buy!

Includes

  • (1) GXL2200 Cardioid Condenser Microphone

  • (1) JamStand JS-MCFB100 Fixed Boom Mic Stand (Black)

  • (1) Pop Filter

  • (1) 20' Microphone Cable

  • (1) Shock mount & mic clip are included. 

     

    Operating Principle

    Externally-Biased Condenser

    Polar Pattern

    Cardioid

    Frequency Response

    30 Hz to 20 kHz

    Sensitivity

    -36 dBV (16 mV) @ 1 Pa

    Impedance

    75 ohms

    Max SPL

    130 dB

    Self Noise

    20 dBA

    Hi-Pass

    100 Hz, 6 dB/oct

    Power Requirements

    P48, 3 mA

    Connector

    3 pin XLR type

    Applications

    Studio Vocals, Voice-over, Choir, Acoustic Instrument, Strings, Piano, Cymbals/Overheads.

     

     

     

 

$169.00 $199.00
Sale

CAD DMC-1 Drum Mic Clip

The DMC1 is an affordable drum mic clip with adjustable height and strain relief that provides isolation form shocks and vibration. Designed for use on all snare and tom drums, the DMC1 easily attaches to most rims.

$19.99 $24.00
Sale

CAD DMC1 Drum Mic Clip 3 Pack

Buy a 3 Pack and Save!

The DMC1 is an affordable drum mic clip with adjustable height and strain relief that provides isolation form shocks and vibration. Designed for use on all snare and tom drums, the DMC1 easily attaches to most rims.

$49.99 $72.00
Sale

CAD U1 USB Recording Microphone

Record directly to your computer!

Applications

Studio Vocals, Speech, Instruments, Podcasts, Desktop Recording

 USB Studio Recording Microphone

  • Record studio-quality audio directly to your computer
  • Excellent for vocals and instruments
  • Podcast over the Internet
  • Create your own audio for video
  • Record your own songs
  • Simply plug in and start recording
  • Windows & Macintosh compatible!

 Features and Benefits

  • Dynamic microphone element for designed for vocals and instruments
  • Cardioid pick-up pattern minimizes background noise and isolates the main sound source
  • Smooth, extended frequency response is excellent for singing, speech and instruments
  • Built in pop filter minimizes “P-popping” 
  • On-Off switch for instant mute
  • Ten-foot USB cable for flexible mic placement Desktop mic stand included
$24.00 $29.00
Sale

Astatic Desk Paging Microphone 878HL

The Astatic Model 878HL is a dual impedance, omindirectional dynamic desk microphone. A rugged Cycolac housing is rugged enough for industrial and commercial public address and paging applications.

The Model 878HL has a slide switch for low or high impedance selection.

The wide band frequency response is smooth and peak free, with a slight rise above 2K Hz to give that "natural" highly intelligible sound.

Integrated long-life DPDT professional leaf switches allow relay operation with your  choice of either a simple push-to-talk bar with locking capabilities, or lift-to-talk operation, to give years of dependable, trouble free performance. The lift-to-talk operation can be disabled with a slide switch located under the microphone base.

The 878HL is manufactured to take normal abuse and retain its performance over a long life. Four molded "feet", non-skid, non-marring, permanently resilient, are located under the zinc die cast base.

Supplied with 2.1m (7 ft.) of four conductor, two shielded cable, the Model 878HL microphone circuit is wired normally open.

Includes

  • CAD Audio 878HL Microphone
  • 6 foot stripped and tined cable.

Applications

  • Paging Applications
  • Intercom Paging
  • Locations requiring a Push-to-Talk microphone

Features

  • Omnidirectional pickup.
  • Push-to-talk with locking switch.
  • Hi or low impedance output.

Specifications

  • Operating Priciple:.......................................Moving coil dynamic.
  • Polar Pattern:.......................................................Omnidirectional.
  • Frequency Response:...............................................50Hz-12KHz
  • Phantom Power Requirements:...............................................NA
  • Impedance:HI-Z.......................................................40,000 Ohms
  • ...................Lo-Z............................................................400 Ohms
  • Sensitivity:....................................................-60dBV (1Mv) at 1 Pa
$129.00 $179.00
Sale

Astatic 611L

The 611L is designed for hand-held applications in quality sound installations. The frequency response, especially tailored for voice communications, provides a crisp, clear, highly intelligible sound.

 

Includes

  • Microphone
  • Instruction Sheet

Applications

  • Paging
  • Security
  • Mobile Communications
  • Emergency

Features

  • Integral DPDT Switch
  • Rugged Cable

Specifications

  • Operating Principle:Moving Coil Dynamic
  • Polar Pattern:Omnidirectional
  • Frequency Response:200 Hz to 6.5 kHz
  • Sensitivity:-56 dBV (1.6 mV) @ 1 Pa
  • Impedance:360 Ohms
  • Cable:Four conductor, two shielded, permanently attached, heavy duty, neoprene jacketed coil cord that extends to 1.8 m (6 ft.)
  • Switch:Operated by press-to-talk lever, 2PDT long life, trouble free switch with spring return. Wired normally open.
  • Housing:Durable molded black Cycolac
  • Dimensions:100mm (3-15/16") high x 75.4mm (2-3/32) wide x 54.8mm (2-5/32") deep
  • Weighty:227 grams (8 oz.)
$79.00 $109.00
Sale

Astatic 119L-19 Gooseneck Microphone

The ASTATIC 119L Series are dynamic cardioid microphones, designed especially for gooseneck mounting in quality sound reinforcement and communication installations. These microphones have a slightly rising high frequency response and a gentle low frequency roll-off, assuring excellent voice reproduction.

A superior cardioid directional pattern minimizes feedback, background noise, reverberation, offaxis coloration and placement problems. A new internal vibration isolation system, consisting of a special rubber mounting ring and a rubber stabilizing ring as a support for the generating element, reduces gooseneck, stand and handling noise. An effective multi-stage blast filter controls breath "pop" and wind disturbances. Available as a 119L (chrome), 119LB (black) and 119L-19 (as shown).

The 119L Series has low impedance outputs. The 119L-19 is supplied with 1.7m (5.5ft), the 119L and 119LB with 2.1m (7ft) of rugged two conductor shielded cable. The 119 Series microphones are extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service.

Includes

  • CAD 119L-19 Microphone
  • 5.5' Cable

Applications

  • Podiums
  • Public Speaking

Features

  • 19" heavy-duty gooseneck
  • 2 3/4" flange
  • 5.5' cable
  • Polished chrome finish

Specifications

  • Operating Principle:.........Moving Coil Dynamic
  • Polar Pattern:...............Cardioid
  • Output Connection:...........Balanced, two wire, unterminated
  • Frequency Response:..........80-15,000 Hz
  • Phantom Power Requirements:..NA
  • Impedance:...................500 ohms
  • Dimensions:..................1.25" x 24"
  • Weight:......................12 oz
  • Sensitivity:.................-60dBV (1.4mV) @ 1Pa
  • Switch:......................none
$109.00 $159.00
Sale

Astatic AMC105SNO-19 Gooseneck Microphone

The AMC105SNO-19 microphone is a cost effective, push button, omnidirectional dynamic designed specially for fixed or gooseneck mounting in quality sound installations. These microphones are extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service. A smooth wide band frequency response with a slight “presence” boost at 2 kHz gives a natural, crisp and highly intelligible sound.

Includes

  • CAD AMC105SNO-19 Microphone
  • 7' Cable

Applications

  • Podiums
  • Public Speaking

Specifications

  • Operating Principle:.........Moving Coil Dynamic
  • Polar Pattern:...............Omnidirectional
  • Output Connection:...........Four (4) wires; 7' Cable
  • Frequency Response:..........150-10,000 Hz
  • Phantom Power Requirements:..NA
  • Impedance:...................550 ohms
  • Dimensions:..................23 1/2" x 1 3/8"
  • Weight:......................170g/6oz
  • Sensitivity:.................-56 dBV (1.6 mV) @ 1 Pa
  • Switch:......................Push-to-talk Switch
$109.00 $159.00
Sale

Astatic 119S-19 Microphone w/ Switch

The 119S19 is a dynamic cardioid microphone, designed especially for gooseneck mounting in quality sound reinforcement and communication installations. A slightly rising high frequency response and a gentle low frequency roll-off, assures excellent voice reproduction.

A superior cardioid directional pattern minimizes feedback, background noise, reverberation, off-axis coloration and placement problems. A new internal vibration isolation system, consisting of a special rubber mounting ring as a support for the element, reduces gooseneck, stand and handling noise. An effective multi-stage blast filter controls breath “pop” and wind disturbances.

The 119S-19 has a high quality push-to-talk switch. The 119S-19 has a low impedance output and is supplied with a 1.7m (5.5ft.) of rugged two conductor shielded cable. The 119S-19 is extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service. Available in 19-inch heavy duty chrome gooseneck.

Includes

  • CAD 119S-19 Microphone
  • 5.5' Cable

Applications

  • Podiums
  • Public Speaking

Features

  • On/off switch wired normally open
  • 19" heavy-duty gooseneck
  • 2 3/4" flange
  • 6’ heavy duty cable
  • Polished chrome finish

Specifications

  • Operating Principle:.........Moving Coil Dynamic
  • Polar Pattern:...............Cardioid
  • Output Connection:...........Four(4) wires; 5.5' Cable
  • Frequency Response:..........12-12,000 Hz
  • Phantom Power Requirements:..NA
  • Impedance:...................600 ohms
  • Dimensions:..................1.25" x 24"
  • Weight:......................850g
  • Sensitivity:.................-57dBV (1.6mV) @ 1Pa
  • Switch:......................Push-to-talk Switch
$119.00 $169.00
Sale

Astatic AMC105-2-19 Two-Zone Paging Mic

The AMC105-2 is a dual zone omnidirectional microphone designed especially for fixed or gooseneck mounting in quality sound installations. A smooth, wide band frequency response with a slight intentional "presence" boost at 2000 Hz gives a "natural", crisp, highly intelligible sound.

Two DPDT sealed micro switches, with color coded buttons for easy identification, permits paging in two areas, and an all-call features obtained by depressing both buttons simultaneously.

The AMC105-2 is extremely rugged and reliable, and will stand up under the most strenuous handling conditions to provide years of dependable service, supplied with a 5/8-27 mounting thread, 2.1m (7ft.) of rugged, synthetic jacketed four conductor, two shielded cable.

Black Cycolac cap, chrome plated screen and black Cycolac housing. A removable set screw is used to secure the front cap to the microphone housing and microphone to the gooseneck.

Includes

  • AMC105-2-19 Microphone
  • Attached Cable
  • Attached Base

Applications

  • Paging

Features

  • Low Impedance, normally open

Specifications

  • Operating Priciple:..........Dynamic
  • Polar Pattern:...............Omnidirectional
  • Output Connection:...........Bare Wire
  • Frequency Response:..........50-13 kHz
  • Pantom Power Requirements:...None
  • Impedance:...................400 ohm nominal
  • Dimensions:..................1 3/8" x 4 9/16" plus gooseneck
  • Weight:......................7 oz
  • Sensitivity:.................-76dB(0dB=1v/microbar)
  • Switch:......................(2) DPDT
$119.00 $169.00
Sale

Astatic WM625

Buy 2 and get free ground shipping within US!

The Astatic Model WM-625 is an omnidirectional dynamic microphone designed especially for mounting to wall boxes. The frequency response is shaped to provide crisp, clear, highly intelligible voice communications. Used in many drive thru intercoms.


Includes

Plate Mounted Microphone
Dress Screws
Instruction/Installation Sheet
Applications

Security
Drive Thru Intercoms
Features

Frequency Response is optimized for speech applications
Low Frequency roll-off reduces engine noise
Specifications

Element Dynamic
Pattern Omnidirectional
Frequency Response 150-4500Hz
Output Level -62 dB(0dB = 1 volt/microbar
Impedance 500 ohms
Your Choice of Switch or No Switch
Dimensions 3.28128"(H)x2.765625"(W)x1.078125"(D)
Weight 3.6 oz
Finish Brushed Stainless Steel

$49.00 $69.00
Sale

CAD GXL3000 Multi-pattern Condenser Microphone Set

We've included a pop filter and 20' cable when you purchase this mic!

 Borne of precious metal and pure electricity. Tune two golden membranes intimately across polished bass and inject electrons with oscillatory high tension. Drive emotion across copper and iron by field-effect detection. Wrap it in Faraday's cage to conceive the GXL3000. Live all three polar patterns as you align space and tone. Features include hi-pass filter and attenuator. Elastic shock mount and protective pouch are included. P48 (48V) phantom power is required.

Applications

Studio Vocals, Voice-over, Choir, Acoustic Instrument, Guitar Cabinets, Bass Cabinets, Piano

Specifications

  • Operating Principal: Externally Biased Condenser
  • Polar Pattern: Cardioid, Figure-of-Eight, Omnidirectional
  • Frequency Response: 35 Hz – 20 kHz 
  • Sensitivity: -38dBV (13mV) @ 1 Pa Impedance: 200 ohms
  • Max SPL: 135dB, 1% THD, attenuator engaged 
  • Self Noise: 20dBA
  • Hi-pass Filter: 100Hz, 6dB/oct 
  • Attenuator: 10dB 
  • Power Requirements: P48, 4mA 

Specifications are subject to change without notice.

$209.00 $299.00
Sale

CAD EPF15A Professional Microphone Pop Filter

Improve your vocal recordings and protect your microphone transducer!

Provides excellent protection from high kinetic sound sources and moisture resulting from close proximity recording.

Features

  • Reduces plosives and P-pops during vocal performance
  • 15" flexible gooseneck for easy placement
  • 2-stage removable nylon screen
  • Universal attachment mounts on all standard mic stands
$29.99 $39.00
Sale

CAD GXL2200SSP Steinberg UR22MKII Samson Media ONE BT3 Speakers

Includes
  • CAD GXL2200 Condenser Microphone
  • x2 GXL1200 Condenser Microphones
  • Steinberg UR22MKII 2-Channel USB Interface Cubase AI and Cubasis LE included
  • Samson MediaOne BT3 Active Studio Monitors with Bluetooth
  • CAD MH110 Closed Back Headphones
  • x2 JamStand JS-MCFB100 Fixed Boom Mic Stand (Black)
  • Pop Filter
  • x2 20' XLR Cable
  • Shock Mount, Swirlyhook and Carrying Case

GXL2200

Applications

  • Ideal candidate for recording, broadcast, sound reinforcement including vocal and instrument applications

Features

  • Large diaphragm condenser microphone
  • Shock mount and vinyl pouch included.

Specifications

  • Operating Principle:..........Externally-Biased Condenser
  • Polar Pattern:...............Cardioid
  • Output Connection:...........3 pin XLR type
  • Frequency Response:..........30 Hz to 20 kHz
  • Phantom Power Requirements:...P48, 3 mA
  • Impedance:...................75 ohms
  • Dimensions:..................2.17" x 7.72" (55mm x 196mm), Mic only
  • Weight:......................14.1 oz. (400 grams), Mic only
  • Sensitivity:.................-37 dB (14.1 mV) re 1V at 1 Pa
  • Switch:......................Without On/Off Switch

GXL1200

Applications

  • Choir, Orchestra, Acoustic Instrument, Guitar Cabinets, Strings, Piano, Cymbals/Overheads, Hi-hat.

Features

  • The transformerless design of this instrument microphone allows it to have low distortion and optimum low end frequency response. The GXL1200's size, accurate sound reproduction, and high SPL capability, make this a great choice for miking overheads, high hats, cymbals, woodwinds and stringed instruments.
  • Mic clip and vinyl pouch included.

Specifications

  • Operating Principle:..........Externally-Biased Condenser
  • Polar Pattern:...............Cardioid
  • Output Connection:...........3 pin XLR type
  • Frequency Response:..........30 Hz to 20 kHz
  • Phantom Power Requirements:...P48, 4 mA
  • Impedance:...................100 ohms
  • Dimensions:..................0.88" x 5.33"
  • Weight:......................126 grams
  • Sensitivity:.................-36 dB (16 mV) at 1 Pa
  • Switch:......................Without On/Off Switch

Steinberg UR22MKII

With Steinberg's extremely compact UR22mkII 2x2 USB 2.0 audio interface, you can record and compose music in studio quality on your laptop or iPad. The unit has outstanding audio and rugged, full-metal build quality for its price class, and it combines choice components with advanced connectivity and flexible I/O options to offer a full-on mobile production platform. This produces a range of features essential to a various audio professionals - songwriter-composers, guitarists, beat producers, vocalists -  such as MIDI compatibility/composition, full iPad connectivity, latency-free monitoring, 24-bit/192 kHz converters, outstanding D-PRE mic preamp and Hi-Z inputs. Although the D-PRE mic preamp is a feature of the whole UR series, in this case it means sumptuously detailed and dynamic sound when recording vocals or acoustic instruments. Neutrik inputs and +48 V phantom power allow connection of both dynamic and high-quality condenser mics.

A wide range of UR models offer independent headphone output and combo connectors while also offering MIDI ports for connection to keyboards and drum pad controllers. As a USB-powered unit, it's ideal for travelers recording on the road.

Steinberg UR22mkII Includes:

  • Cubase AI DAW software download (for Mac and PC)
  • Cubasis LE (iPad mobile music production app)

Steinberg UR22mkII Features:

  • 24-bit/192 kHz 2 x 2
  • 2 Class-A D-PRE mic preamps supporting +48 V phantom power [rich low end; detailed high end; wide dynamic response; great sound quality across the frequency spectrum]
  • 2 combo inputs (Hi-Z switch on input 2), 2 TRS ouputs
  • 1 headphones output with independent level control
  • Zero-latency hardware monitoring with Mix balance control
  • USB-powered for mobile recordings with Mac and PC,additional USB micro connector for power source connection when used with iPad
  • MIDI input and output
  • Loopback function for streaming performances live tothe internet
  • Rugged full-metal housing
  • Cross-platform compatibility with Windows and OS X, and iPad connectivity (with Apple iPad Camer Connection / Lightning to USB Camera Adapter)

Steinberg UR22mkII Specifications:

  • System Requirements:
    • Mac OS X:
      • Mac OS X 10.7/10.8/10.9/10.10/10.11
      • iOS 7 (or higher) on iPad 2 (or higher)
      • Intel dual core CPU
    • Windows:
      • Windows 7 SP1/8/8.1/10
      • Intel or AMD dual core CPU
    • 2 GB RAM
    • 4 GB of free HD space
    • CD-ROM drive
    • USB 2.0/3.0 port
    • CC mode: requires Apple iPad Camera Connection KIt / Lightning to USB Camera Adapter and an external 5 V DA adapter, or an external battery pack
    • Internet connection required for installation, activation, account setup and personal / product registration. To complete the Cubase AI installation, a download of approximately 500 MB is required.
  • Technical:
    • Resolution: 24-bit/192 kHz
    • Power: External power supply
    • Total I/O: 2/2
    • Analog Inputs: 2 Combo
    • Mic inputs: 2 (D-PRE)
    • Phantom power: 2
    • Input with Hi-Z: 1
    • Analog outputs: 2 TRS
    • Headphones (mW @ 40 Ohm): 1 (6 mW) with independent volume
    • Zero-latency monitoring: Hardware based (rotary)
    • iPad Capability: Yes
    • Loopback function: Yes
    • MIDI I/O: Yes

The Samson MediaOne BT3 Active Studio Monitors produce 15 watts per channel RMS and 30 watts per channel Peak of full-range audio. Their 3" copolymer woofers deliver a controlled low frequency response, while their 1" silk dome tweeters give the high frequencies a natural sound without unwanted noise. Each rear-vented, precision-tuned port enclosure is finished in an all-black satin vinyl covering with matching metal grilles for the woofers and tweeters.

Using Bluetooth, you can easily pair this system with your smartphone, laptop or tablet, and listen to your music, videos and other media applications through MediaOne BT3 monitors without wires. The Bluetooth pairing button can be found on the active speaker's rear control panel, along with the system's RCA inputs, passive monitor terminals and an AC power connector. In addition, the front panel houses an LED indicator, level control, as well as both a headphone output and stereo input. The 3.5mm stereo input can be used to connect secondary signal sources such as MP3 players, keyboards and more.

Samson MediaOne BT3 2-Way Active Studio Monitors with Bluetooth Features:

  • 2-way active studio monitors with rear-vented, precision-tuned port enclosures (sold as a stereo pair)
  • Bluetooth connectivity to connect wireless music sources
  • 3" copolymer woofers
  • 1" silk dome tweeters
  • 15 watts per channel RMS, 30 watts per channel Peak
  • Front panel LED indicator, level control, headphone output and stereo input
  • Back panel Bluetooth pairing button, RCA inputs, passive monitor terminals and AC power connector
  • AV shielded for multimedia applications
  • Passive crossover design for linear response from bottom to top
  • All-black satin vinyl finish
  • Metal grilles protect woofer and tweeter components
  • Speaker cable included

$639.99 $699.99
Sale

CAD Touring7 Seven-piece Percussion Microphone Pack

CAD TOURING7 Drum Mics

 Includes

  • (4) TSM411 Supercardioid Neodymium Dynamic Microphone

  • (1) D12 Cardioid Dynamic Large Diaphragm Kick Drum Microphone

  • (2) GXL1200 Cardioid Condenser Microphone

  • (4) DMC1 Drum Mic Clips

  • (1) Carrying case for easy transport and storage

Specifications

TSM411

D12

GXL1200

Operating Principle

Moving Coil Dynamic
Moving Coil Dynamic
Externally-Biased Condenser

Polar Pattern

Supercardioid
Cardioid
Cardioid

Frequency Response

100 Hz to 15 kHz
50 Hz to 16 kHz
30 Hz to 20 kHz

Sensitivity

-56 dBV (1.6 mV) @ 1 Pa
-66 dBV (0.5 mV) @ 1 Pa
-36 dBV (16 mV) @ 1 Pa

Impedance

310 ohms
60 ohms
100 ohms

Max SPL

NA
NA
135 dB

Self Noise

NA
NA
17 dBA

Power Requirements

NA
NA
P48, 4 mA

Connector

3 pin XLR type
3 pin XLR type
3 pin XLR type

Application

Brass, Guitar Cabinets, Bass Cabinets, Snare Drum, Rack/Floor Toms.
Bass Cabinets, Kick Drum, Rack/Floor Toms.
Choir, Orchestra, Acoustic Instrument, Guitar Cabinets, Strings, Piano, Cymbals/Overheads, Hi-hat.

Specifications are subject to change without notice.

$399.00 $569.00
Sale

CAD GXL3000 Multi-pattern Condenser Microphone

Borne of precious metal and pure electricity. Tune two golden membranes intimately across polished bass and inject electrons with oscillatory high tension. Drive emotion across copper and iron by field-effect detection. Wrap it in Faraday's cage to conceive the GXL3000. Live all three polar patterns as you align space and tone. Features include hi-pass filter and attenuator. Elastic shock mount and protective pouch are included. P48 (48V) phantom power is required.

Applications

Studio Vocals, Voice-over, Choir, Acoustic Instrument, Guitar Cabinets, Bass Cabinets, Piano

Specifications

  • Operating Principal: Externally Biased Condenser
  • Polar Pattern: Cardioid, Figure-of-Eight, Omnidirectional
  • Frequency Response: 35 Hz – 20 kHz 
  • Sensitivity: -38dBV (13mV) @ 1 Pa Impedance: 200 ohms
  • Max SPL: 135dB, 1% THD, attenuator engaged 
  • Self Noise: 20dBA
  • Hi-pass Filter: 100Hz, 6dB/oct 
  • Attenuator: 10dB 
  • Power Requirements: P48, 4mA 

Specifications are subject to change without notice.

$199.00 $279.00
Sale

CAD M179 Variable-pattern Condenser Microphone

Travel the space-tone continuum with the touch of a dial. The figure-of-eight is rich and intimate. The omni is spacious and articulate. Experience all the variations in between. We combine the large-diaphragm capsule with algebraic phasing and high-power transformerless drive to create an indispensable acoustical window. Additional features include hi-pass filter and attenuator. Swivel mount, elastic shock mount and carrying case are included. P24 (24V) or P48 (48V) phantom power is required.

Applications

Studio Vocals, Voice-over, Choir, Orchestra, Acoustic Instrument, Guitar Cabinets, Bass Cabinets, Strings, Piano, Cymbals/Overheads.

Specifications

  • Operating Principle: Externally-biased condenser
  • Polar Pattern: Continuously variable
  • Frequency Response: 20Hz to 20KHz 
  • Sensitivity: -36dBV (16mV) @ 1 Pa
  • Impedance: 200 ohms
  • Max SPL: 143dB, 1% THD, attenuator engaged 
  • Self Noise: 11dBA 
  • Hi-pass Filter: 100Hz, 6dB/oct
  • Attenuator: 10dB 
  • Power Requirements: P24, P48, 8mA

Specifications are subject to change without notice.

$229.00 $329.00

CAD Digital Wireless Microphone System GLXD2

Enjoy the easy and exciting performance that the GXLTM Digital Wireless Series provides for your next performance. CAD Audio has been creating valued product since 1931 and prides itself on developing and supporting the live performer. Our design criterion was straightforward. Develop a high value wireless microphone system that can cope with today’s challenging RF environment that is both easy to use and exciting to operate.

Includes

  • Two Channel Digital Receiver
  • Two Transmitters
  • Receiver Power Supply

Features

  • Each channel has an RF indicator light that indicates the presence of connectivity.
  • Digital High Definition Audio
  • Advanced dipole antenna technology for increased operating range.
  • Both transmitter style include on/off and mute function.
  • Bodypack systems ship with WXGTR guitar cable and WXHW condenser headworn mic

Specifications

    • Professional balanced XLRM-type discrete output
    • 1⁄4" unbalanced output
    • Handheld transmitters feature the CADLiveTM D38 capsule
$219.00

Scroll To Top