Atlas

Atlas Sound Tube Extension

6 INCH LONG TUBE

5/8 INCH #27 THREAD MALE ON BOTH ENDS

$7.99

Atlas Micstand Coupler

5/8"-27 female to 5/8"-27 female coupling; chrome plated

(Net Weight: .6 oz.)

$8.99

Atlas AT100

High-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems.

Attenuation is accomplished in ten make before break steps plus positive off position. (No stop between maximum and off position to prevent switch damage).

Contacts are silver plated for noise-free operation.

Features a removable terminal block. Includes stainless steel plate, with stamped and filled or screen printed dial scale and a skirted black knob.

$32.99

Atlas Sound Ceiling Speaker SD72W

The loudspeaker used in the SD72W is the next generation of Atlas high performance cone loudspeakers, very similar to the preceding C-Series loudspeakers. The similarity in the sonic qualities ensures that contractors and designers who have worked with the AtlasIED C-Series in the past will know exactly what to expect when they use the SD72W.

Model SD72W is a dual cone, 25 watt 8" (205mm) loudspeaker with a 10oz. (260g) ceramic magnet. It includes a curvilinear, treated paper cone for lower harmonic distortion. The loudspeaker is also equipped with a full 1" diameter copper voice coil with a black anodized aluminum former for better power dissipation. Package includes factory installed 25/70.7V line matching transformer with tap selections ranging from .25 to 5 watts.

Model SD72W operates within a frequency response range of 45Hz - 19kHz (nominal) with a sensitivity of 97dB and a dispersion angle of 105°.

The SD72W includes a factory installed CRS baffle with concealed loudspeaker mounting studs and includes screw mount hardware. The SD72W baffle features standard mounting holes to accommodate the majority of AtlasIED 8" tile bridges, mounting rings and enclosures. When specifying mounting hardware be advised that the dimensions of the SD72W baffle match the AtlasIED Model 62-8. The baffle finish is white powder coat epoxy.
$32.99

Atlas Studio Boom Mic Stand

These top-of-the-line boom stands feature a variable, piston-type air suspension system to ensure microphone protection. Model SB-36W is equipped with silent-motion, ball-bearing swivel casters of hard rubber for friction-free and vibration-absorbing mobility.

Two-piece horizontal boom assembly is 7/8" dia. cold rolled steel with a heavy-duty, die-cast, gyromatic swivel and an adjustable 6-lb. counterweight for precise and secure orientation. Tubing terminates with an adjustable mic holder swivel with standard 5/8" - 27 thread to accept all microphones, holders, and adapters.

Vertical tube assembly is manufactured of 1 1/8" and 7/8" chrome-plated cold rolled steel and includes the wearproof AtlasIED® grip-action clutch for easy adjustment and positive locking. Model SB-36W includes wheels for a height span of 49" to 73". Triangular cast metal base with edge-concentrated weight distribution offers extra stability and is finished in ebony epoxy with a chrome shell.

FEATURES
  • Adjustable 6-lb. Counterweight Provides Precision, Balance, and Stability
  • Caster-Equipped Model Offers Silent and Effortless Mobility
  • Made To High Quality Standards
  • Professional Boom Stand for Stage and Studio Use
  • Rugged Construction and Heavy-Duty Components Assure Long Service Life
  • Variable, Piston-Type Air Suspension System Ensures Microphone Protection
  • Wearproof, Three-Piece Clutch Offers Secure, Fast, and Noise-Free Adjustment
SPECIFICATIONS
  • Tube Style...............................................Two Section
  • Boom Counter Weight..............................Adjustable, 6 lbs
  • Boom Length............................................62 Inches
  • Stand Height.............................................49-73 Inches
  • Shipping Weight........................................40 lbs

 

Typically Ships in 3-5 Days

$411.99

Flexible Gooseneck Adapter 6", 13", 0r 19"

The GN-13 flexible gooseneck attachs to any microphone stand or adapter with 5/8"– 27 male and female threads. Inside diameter is .338". Chrome Finish.
FEATURES
Attach to Any Mic Stand or Adapter with 5/8"-27 Treads
Available in Chrome or Ebony
Flexible Enough to Adjust, Strong Enough to Stay in Place
$8.99

Atlas FAP42T (Priced and Sold as Pairs)

FAP42T combines superior coaxial loudspeaker performance with wide dispersion and easy installation. A low profile enclosure and wide coverage make the FAP42T a perfect choice for low ceilings.

The FAP42T will satisfy the needs of owners, architects, contractors, and consultants by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system.

The FAP42T is ideal for high-intelligibility voice, music, and signal reproduction in commercial, industrial, and institutional applications.

Includes

  • Speaker
  • Support Ring
  • Support Rails for Suspended Ceiling

Applications

  • Ceiling Installation
  • Music
  • Sound Reinforcement

Features

  • 4 Pole Detachable "Phoenix" Style Connector Allows Easy Pre-Wiring and is Convenient for Daisy Chaining Additional Strategy Full Range Speakers or Subwoofers
  • Easy Installation in Drop Tile or Sheetrock Ceilings via C-ring/V-rail Tile Bridge and "Dog Leg" Mounting System (Included)
  • Enhanced Quality 70.7V/100V Internal Transformers Minimize Insertion Loss and Maintain Low Frequency Response While Providing increased Output for Higher SPL Applications
  • Extended Low Frequency Response from the 285 Cubic Inch Optimally Tuned and Ported Deep Drawn Galvanized Steel Enclosure
  • Front Mounted Tap Selector Switch for Easy System Tuning Adjustments Includes Transformer Bypass Setting for 8 ohm Direct Coupled Operation
  • Perfect Companion with the FAPSUB Subwoofer System When Sub Bass is Required
  • Press-Fit Grill Blends Perfectly into Contemporary Architecture

Specifications

  • Impedance:……….1, 2, 4, 8, 16 Watts & 8Ω
  • Speaker Type:……………Coaxial
  • Output Connection:………..4 Pole Detachable “Phoenix” Style Connector
  • Frequency Response:..........75Hz - 20kHz
  • Certified to Safety Listing:……………….UL 1480
  • Diameter:………………10 1/2" (26.67 cm)
  • Weight:...................... 3 Lbs
  • Sensitivity:.................88dB Average
  • Switch:………………….Impedance Selector
$104.99
Sale

Atlas SM52T-B Speaker

Environment-resistant SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and FerroFluid cooled, titanium dome high frequency device. Vocal and musical clarity is optimized by the mathematically conceived, advanced design of the AtlasIED TRX Control WaveGuide high frequency director.

This design provides smooth, even sound coverage (90°H x 90°V). The high frequency section is symmetrical, for equal coverage in both vertical and horizontal cabinet mounting positions. High frequency component protection is provided by the AtlasIED PolyGuard protection circuit. The SM52T includes an internally mounted 30 Watt 70.7V/100V line matching transformer with 8Ω bypass and screwdriver adjustable tap selection for use in distributed sound applications.

To withstand the harshest environments, the new Strategy Series SM52T surface mount loudspeakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; polypropylene woofer cones; powder coated aluminum grilles and all brass hardware.

The Strategy Series loudspeaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. Ensure that the chosen fixing point is strong enough to support the SM52T. Care should also be taken to prevent the SM52T from being exposed to direct precipitation.

A 5/8"-27 threaded hole is provided on the C-bracket to allow the SM52T series loudspeaker to be mounted on any AtlasIED microphone stand for near-field live sound applications. 2-3/8" OC brass inserts are also provided on the rear of the SM52T to accommodate an OMNIMOUNT bracket. All inserts for mounting knobs are standard 1/4"-20 to allow easy substitution of off-the-shelf vandal-proof torx® head or "one-way" hardware (not sold by AtlasIED).

Input connectors include a two pole barrier strip with wire capture "caps" capable of accepting up to (2) #14AWG cable. .94, 1.9, 3.7, 7.5, 15, 30 watt and 8Ω bypass taps are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Can be painted to accommodate any architectural considerations.

Includes

  • Atlas SM52T-B Speaker
  • Wall Mount Bracket w/ knobs
  • Manual

Applications

  • Background/Foreground Music
  • Indoors/Outdoors

Features

  • Includes internal, high efficiency 70.7V / 100V transformer (may be bypassed for 8Ω operation)
  • Barrier strip input with weather resistant cover
  • Bracket included for wall mounting
  • Also compatible with optional mounting systems from Atlas Sound and others
  • Atlas Sound SMBALLMOUNT (indoor use only) or OmnimountTM 10.0 series
    • Other mounting systems (single shaft or dual hole mount) may be used to match 1⁄4"-20 insert(s) on rear of speaker.
    • Dual hole mounting systems must match 23⁄8" (60mm) OC, 1⁄4"-20 insert spacing.
    • Mounting system must be rated to support at least 10 lbs (4.5Kg)

Specifications

  • Speaker Type………………Surface Mount
  • Input Connection:………Screw Terminal
  • Frequency Response:……….20Hz-20kHz
  • Power Taps .94, 1.9, 3.7, 7.5, 15, 30(70 Volt) & 8 Ohm Bypass
  • Sensitivity………..............………90dB
  • Height:………………..........….10 3/16”
  • Width:……....................………..6 7/8”
  • Depth……………...............…….5 7/8”
  • Shipping Weight…………….. 8.50 lbs
$180.99 $201.99
Sale

Atlas SM42T Surface Mount Speaker

All AtlasIED Strategy Series loudspeaker systems are designed to provide high fidelity, long life and installation convenience for commercial and residential applications. Because of their weather-resistant properties they are perfect for use indoors or out.

The SM42T includes a 4" woofer and 1" tweeter as well as an integrated 70.7V / 100V transformer and 8Ω bypass for direct coupled applications.

Use surface-mount AtlasIED SM42T Series loudspeaker systems for commercial, professional and residential applications or where high-fidelity sound and weather-resistance is desired. Full-range frequency response makes these systems ideal for indoor and outdoor installation, in monaural and stereo foreground or background music systems, and for applications in boutiques/shops, restaurants/cafes, corporate AV applications and houses of worship. Multi-position, C-shaped mounting bracket and rugged construction provide optimum installation flexibility and assurance of long-term service.

Includes

  • SM42T Speaker
  • Color Matched “C” Mounting Bracket
  • Color Matched Knobs

Applications

  • Commercial, Professional and Residential Applications
  • Indoor and Outdoor Locations

Features

  • Compact 2-way Loudspeaker System
  • 1/4”-20 Hardware
  • 4” Woofer
  • Available in Black or White

Specifications

  • Power Rating……………..16 Watts RMS
  • Transformer Taps…….2,4,8 & 16 Watts @ 70V and 8ohm Bypass
  • Input Connection:………..Screw Terminal
  • Frequency Response:……….115Hz-16kHz
  • Sensitivity………….88dB
  • Height………….7”
  • Width…………..5”
  • Depth………………5 15/16”
$81.99 $90.99

Atlas SM8SUB70

The SM8SUB70 8" subwoofer system is perfect for restaurants, bars, and high-fashion retail outlets. The system utilizes a 8" woofer housed in a 915 cubic inch multi-angle, flyable, wood enclosure system to provide extended low frequency response with a wide variety of mounting options. (Not for outdoor use!).

Inserts are included for use with 1/4"-20 drop forge eyebolts, optional SM8CBKT-B /-W mounting bracket. An 18 dB/octave three-pole passive crossover eliminates the need for a separate electronic network or dedicated amplification to power the loudspeaker. Its low crossover point (120Hz) nearly eliminates localization, allowing a designer to boundary-load the SM8SUB70-B near a wall or into a corner for maximum output, while maintaining even coverage throughout the space.

A premium 70.7V transformer allows the SM8SUB70 to be paralleled with any 70.7V commercial audio system to provide extended low frequency response and more overall audio impact for foreground music systems. (Unit is also 8ohm compatible). Perfect for use with other SM series full range loudspeakers Available In black (SM8CXT-B) or White (SM8CXT-W)

Includes

  • (1) Subwoofer

Applications

  • Distributed Music Systems
  • Features

Features

  • Attractive, yet Heavy-Duty Grille Assembly
  • Barrier Strip Input for 70.7/100V/8 Ohm or Parallel 4 Pole Speak-ON™ Input for 8 Ohm Operation Only
  • Durable Black, Rough-Coat Finish
  • Fuse Protection for Driver
  • Includes Internal High Efficiency 60 Watt 70.7/100V Transformer (May be Bypassed for 8 Ohm Operation)
  • Multiple 1/4"-20 Inserts, Providing Fly Points for a Variety of Mounting Configurations
  • Optional Bracket for Wall Mounting
  • Unique Input Panel Allows Use of Standard 4" Square Box Cover (Raco 753 or eq.) for Applications Where Flex Conduit is Required for Termination

Specifications

  • Frequency Response………..55Hz-100Hz
  • Speaker Type…………….Sub
  • Dispersion:………..Omni
  • Width:……….10 5/8”
  • Height…………..15 1/2”
$376.99

Atlas MA40G

Small and compact, and engineered for reliability, the AtlasIED MA40G amplifier is the perfect choice for distributed business paging and background music (BGM) systems, and small to medium speech privacy systems.

It provides 40W into a 70.7V/100V line and has three total inputs including a balanced mic/line input featuring phantom power and variable mute sensitivity control as well as two unbalanced, summing line level inputs. Additional features include Removable Level Controls with set it and forget it security cover, contact closure mute terminals, and a global (100VAC-240VAC) power supply.

The MA series of amplifiers are part of a new line from AtlasIED that are designed from the ground up and include the important features professional installation personnel require to meet or exceed their customer's expectations.

Includes

  • Amplifier
  • Power Cord
  • Input connectors
  • Instruction Manual

Applications

  • Business Music
  • Paging Systems

Features

  • 3 Inputs (1) balanced mic/line (2) Unbalanced Summing Line-level via RCA connectors
  • Inputs 2 and/or 3 may be muted via contact closure or adjustable voice activated mute initiated from channel 1.
$240.99

Single Gang Blank Panel

1 Rack Space

Atlas Sound Panels Provide Aesthetic Continuity and Security for Unfilled Cabinet Spaces

Includes Oblong Mounting Holes on E.I.A. Universal Spacing for Adjustment Flexibility

Solid Model Offers Dust Protection

Stocked in Textured Black Epoxy

$10.99

Scroll To Top